Interesting Product for Air Duct Zoning

Post Reply
 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Sun. Nov. 06, 2011 2:51 pm

Seen this on ebay, looks like kids water wings LOL!
Took a little while to grasp the concept...Have a look for yourself:

Interesting Product for Air Duct Zoning

Well there is another key component, it turns out...$$$ Aquarium pump and some solenoids mounted in a panel.

FLEXDAMPER AIRZONE SOLENOID PANEL WITH PUMP

 
User avatar
AA130FIREMAN
Member
Posts: 1954
Joined: Sat. Feb. 28, 2009 4:13 pm

Post by AA130FIREMAN » Sun. Nov. 06, 2011 3:21 pm

It's an idea, but relly, but why not just adjust the registeres to make the rooms all balanced. I replaced the air filter on the air handler with one of the good hepa filters and the fan motor sounded like it had asthma (replaced with good old el cheap O ), can't imagine all the zones with those in and only one register open. :blowup:


 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Sun. Nov. 06, 2011 3:48 pm

Correct you are, I don't want it either.

Just putting it out there for peoples awareness...some stove fellow may take a fancy to it for a hybrid distribution system. :idea:

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”