Installing Single Wall Chimney for Coal Stove?
- europachris
- Member
- Posts: 1017
- Joined: Sat. Dec. 09, 2006 5:54 pm
- Location: N. Central Illinois
Here's how I sealed my grate with furnace cement at the rear edge as well as the sides up to the first row of holes. I have absolutely no issues with smoke through the hopper or burnback whatsoever.
ChrisDo you guys think running 2 90 degree elbows and going directly into a masonry chimney is ok for drafting. I have a harman mark 1. Also there will be a slope from thr second elbow going slightly upwards to the chimney
Welcome to the forum Jose....Is it just the two 90's from the stove to the chimney or is there straight pipe also? If there, how long are the straight pipe sections?
- freetown fred
- Member
- Posts: 30300
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Not really familiar with the stove but if the outlet is in the back a "T" would work best & then your 90* going in to the chimney. 90's tend to accumulate fly ash. With a "T" you could clean out if necessary much easier. Or what T posted with his pix, those elbows are adjustable.