Class "A" chimney 9"?

Post Reply
 
Soupy6914
Member
Posts: 27
Joined: Fri. Feb. 02, 2018 9:21 am
Location: Buffalo, Ny

Post by Soupy6914 » Tue. Sep. 10, 2019 10:25 am

So I have been running an Efm 520 in my basement for about 3 years now. I love it but want to move it to my garage. The problem I have is venting. I see the efm recommends a 9" pipe but I can't seem to find it. Does anybody know of a source, or should I just run with 8"

 
User avatar
McGiever
Member
Posts: 8080
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: RICE,PEA,NUT,STOVE /ANTHRACITE and EGG / BIT
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Tue. Sep. 10, 2019 11:01 am

Does it run hard, flat out...or just skip along at a slower pace....see where I'm going here???

Does or will the new garage stack have 3 or 4 90's in it?

 
Soupy6914
Member
Posts: 27
Joined: Fri. Feb. 02, 2018 9:21 am
Location: Buffalo, Ny

Post by Soupy6914 » Tue. Sep. 10, 2019 1:24 pm

Dosen't seem to run hard?? Garage will just be one 90 and then straight up and out

Visit DS Stoves

 
User avatar
McGiever
Member
Posts: 8080
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: RICE,PEA,NUT,STOVE /ANTHRACITE and EGG / BIT
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Tue. Sep. 10, 2019 11:06 pm

Soupy6914 wrote:
Tue. Sep. 10, 2019 1:24 pm
Dosen't seem to run hard?? Garage will just be one 90 and then straight up and out
BINGO! You'll be fine with an 8"

 
Rob R.
Site Moderator
Posts: 13567
Joined: Fri. Dec. 28, 2007 4:26 pm
Location: Chazy, NY
Stoker Coal Boiler: EFM DF520
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: Lehigh Rice
Other Heating: Dad's 1953 EFM Highboy

Post by Rob R. » Wed. Sep. 11, 2019 6:06 am

McGiever wrote:
Tue. Sep. 10, 2019 11:06 pm
You'll be fine with an 8"
x2.

Post Reply

Return to “Coal Bins, Chimneys, CO Detectors & Thermostats”