Also what position should the slide brick be in.Draft Setting on a Channing III
Can some one tell me what the draft reading should be on a Alaska Channing III stove with an Alaskan Direct Vent System. The dealer where I bought it stated a Negative .03 to .04 and the directions state .03 to .04 which I assume is Positive. Also what position should the slide brick be in.
Also what position should the slide brick be in.-
WNY
- Member
- Posts: 6307
- Joined: Mon. Nov. 14, 2005 8:40 am
- Location: Cuba, NY
- Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
- Coal Size/Type: Rice
- Contact:
Teh stove should ALWAYS be under a vacuum, so the -.02 to -.04 would be the CORRECT Setting. BUT, depending on how you hook up your draft gauge, sometimes easier to read on the POSITIVE Side of the scale, you would just flip the low/high sensing port.
If you look at the scale, it can read +/-. I run it on the POSITIVE Side.
If you look at the scale, it can read +/-. I run it on the POSITIVE Side.
