Page 1 of 2

Painting Inside W/ High Temp Rustproof Paint??

Posted: Fri. Oct. 10, 2008 11:24 am
by catdog
I think someone had metioned painting the inside of liesureline stoves w/ high temp paint sometime ago...does this still hold true they are bare metal inside? and rust fast? should I do this when I get my stove? thanks! :D

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Fri. Oct. 10, 2008 11:48 am
by Rick 386
Here's one thread about painting them:

Paint the Inside of My New Stove?

I painted the inside of my brand new Hyfire II prior to lighting the first fire this season. I'll let everyone know the results at the end of the season.

----------------------------------------

Rick

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Fri. Oct. 10, 2008 2:48 pm
by orvis
Maybe try a ceramic automotive exhaust header paint. They are not cheap, though.

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Fri. Oct. 10, 2008 6:02 pm
by catdog
I just ordered 2 cans of VHT Paint Flameproof Coating Flat Black SP102 good for up to 2,000 deg from nasa invented it for space shuttle through summit racings ebay site @ 9.25 can pretty good deal I think. :D

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sat. Oct. 11, 2008 6:37 pm
by catdog
btw : they use this paint on the space shuttle for re-entry into earth atmosphere. WOW :shock:

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sat. Oct. 11, 2008 6:47 pm
by traderfjp
I haven't run my stove full tilt yet but the paint inside the stove is holding up so far. There is a little blistering right over the grate, on the back wall, but the rest looks good. I did see that some of the corrosion was starting to peek through before I lit the stove. In retrospect, I should have used naval jelly to remove all the rust. POR-15 is suppose to neutralize all rust. In all fairness I did one thick coat instead of two light coats. The paint sticks and is impossible to remove from your skin once it comes in contact. Next summer I'll sand again and make sure all the rust is neutralized with naval jelly and then use a high heat ceramic paint. I need to find a paint I can brugh on. The spray stuff goes all over and taking the stove outside is not an option. My original prep work consisted of washing the inside of the stove with a srayer using a solution of water and baking soada.. I did this 3 times and then sanded.

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sat. Oct. 11, 2008 8:35 pm
by k9 Bara
"The spray stuff goes all over and taking the stove outside is not an option."

Trader, try this. I take my shop vac hose, stick it in an opposite corner and turn it on when spraying. It pulls the the over spray in. I have a extra long hose also (on the shop vac :? ) and keep the vacum in another room, or outside. Nice when removing the ashes also. ;)

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sat. Oct. 11, 2008 9:56 pm
by traderfjp
That's a great idea! Thanks

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sat. Oct. 11, 2008 11:45 pm
by Matthaus
k9 Bara wrote:"The spray stuff goes all over and taking the stove outside is not an option."

Trader, try this. I take my shop vac hose, stick it in an opposite corner and turn it on when spraying. It pulls the the over spray in. I have a extra long hose also (on the shop vac :? ) and keep the vacum in another room, or outside. Nice when removing the ashes also. ;)
Just be careful drawing a potentially explosive paint fume mixture through a vac system adjacent to an electric motor. The filter will probably take care of most of it (especially if it's a little dirty)... but then again be better safe than sorry. :) .

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sat. Oct. 11, 2008 11:46 pm
by traderfjp
Good point. Kaboom is not a sound I want to hear. Can anyone suggest a paint on ceramic paint?

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sat. Oct. 11, 2008 11:53 pm
by k9 Bara
Lol, good point. I use the vacuum when I pull the ash can. I pull a few inches of ash off the front of the grate causing the dust to fly. Thats how I got using it in such a way. But you are correct, I should have thought about it.

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sun. Oct. 12, 2008 3:00 pm
by Yanche
Matthaus wrote:Just be careful drawing a potentially explosive paint fume mixture through a vac system adjacent to an electric motor. The filter will probably take care of most of it (especially if it's a little dirty)... but then again be better safe than sorry. :) .
Some of my friends in the Chicago area Corvair Club make a contest of having vacuum cleaners explode. The idea is to have junk vacuums suck in gasoline and see how long they last and how high they rocket. All done in fun from a safe distance in combination with lots of beer. You have to see in person or view the video tape to believe it. Read about it here:
**Broken Link(s) Removed**. The video tape was once sold as a fun raiser. It would make a great YouTube post.

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Sun. Oct. 12, 2008 5:45 pm
by traderfjp
Sounds like fun. I just threw out an old Bissel. Too bad!

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Fri. Oct. 17, 2008 2:14 pm
by catdog
UPS just brought my Nasa Space Shuttle engine paint(flameproof) vht ceramic, now just waiting for stove from LL. :D

Re: Painting Inside W/ High Temp Rustproof Paint??

Posted: Fri. Oct. 17, 2008 8:09 pm
by traderfjp
Keep us posted. I just lit my stove tonight.