LL Pioneer Stoker Stroke

A Coal stoker furnace or stove controls most operations including automatically feeding the coal. They are quite similar to any conventional oil and gas units and easily operated for extended periods of time. They commonly use rice coal but may use larger sizes like buckwheat. They can be used as primary heat, supplementary heat or have a dual set up with your existing oil/gas furnace.
Post Reply
coldwind
New Member
Posts: 15
Joined: Thu. Jun. 19, 2008 4:48 pm
Stove/Furnace Make: LL
Stove/Furnace Model: Pioneer LE
Location: Maine

Post Sun. Oct. 05, 2008 12:24 pm

Was wondering if anyone could tell me what the stoker stroke length is suppose to be for Pioneer. Mine looks to be about 3/8" is this right? Or did I put the plate on top of the grate in wrong? Already up to 50 on max and when at 100 FR I still have only a band of burning coal about 1.5" wide and about 4" of ash till end of grate. At this rate when it's actually cold out, I'll be at 100 max feed and 100% FR and still have a few inches to the end of grate. Thanks


Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”