Jerry do you have a sketch for the wall clearances for a stove that is canted in a corner? I think the township will need it for appoval or final inpection of my stove installation.
Thanks Scott
Jerry ...Need a Sketch
-
Jerry & Karen
- Member
- Posts: 381
- Joined: Mon. Jan. 23, 2006 7:30 pm
- Location: Berwick, pa
- Contact:
Hi Scott,
We do not have a corner sketch. The hopper must be 2" away from the wall. The stove it's self must be 12" or 16" away from the wall (I'm not sure what the code says). This is measured from the very back of the corner of the stove to the wall. You can't keep it to close or you can't get in the back to put coal in the hopper.
Jerry
We do not have a corner sketch. The hopper must be 2" away from the wall. The stove it's self must be 12" or 16" away from the wall (I'm not sure what the code says). This is measured from the very back of the corner of the stove to the wall. You can't keep it to close or you can't get in the back to put coal in the hopper.
Jerry