Robax glass.etch from coal?

Post Reply
 
Crazyfarmer
Member
Posts: 99
Joined: Tue. Nov. 17, 2020 7:35 pm
Hand Fed Coal Boiler: Eagle foundry company BELLEVille Illinois 42L 16

Post by Crazyfarmer » Fri. Oct. 28, 2022 1:01 am

I looked into some older posts, but haven’t found what I’m looking for or has anybody dabbled in this is this the way to go in 2022? Does Robax glass etch from coal? Or what else is out there so I could continue watching the flames in my leisure Line, Pocono Stove. or it doesn’t matter what you put in there it’s going to get cloudy and just a orange glow Thanks

 
User avatar
freetown fred
Member
Posts: 30293
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Fri. Oct. 28, 2022 11:59 am

Just the nature of the beast C----I'm sure you'll have a dozen ideas here--most of which I've tried!!!:(


 
User avatar
Lightning
Site Moderator
Posts: 14659
Joined: Wed. Nov. 16, 2011 9:51 am
Location: Olean, NY
Stoker Coal Boiler: Modified AA 130
Coal Size/Type: Pea Size - Anthracite

Post by Lightning » Fri. Oct. 28, 2022 12:13 pm

I've used Neoceram on a hand fed furnace and now with my Axeman boiler. I've had no "etching" with it.

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”