Building a outside auger to push coal in my house.

 
christack
New Member
Posts: 16
Joined: Sun. Sep. 15, 2019 8:28 pm
Hand Fed Coal Stove: Brunco

Post by christack » Sun. Oct. 16, 2022 8:33 pm

Been wanting to build a coal ben. I started out was going to buy a dumpster and they was $350 and then have to cut the bottom out and fix he bottom so the coal would go down . So I look at building it out of wood and wood is so high now that I was looking around 4 to $500 for wood . So I ask a friend since he is a farmer if they had anything like what I need . So here is what I come up with. Its called a Graivty Wagon . Got this baby for $450 and its 12ft long and 6ft wide and 3ft deep just from the square part not counting the belly of the wagon . It should hold 7.5 ton of coal and next is going to be weld and modify the bottom for my aurger. This is the start of it and I will post pictures as I get it done. Hopefully I will make this thing work and i can feed my coal in my hopper in my basement .


 
User avatar
freetown fred
Member
Posts: 30298
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Oct. 16, 2022 9:48 pm

It's been done before around here & they work well---:)

 
User avatar
BunkerdCaddis
Member
Posts: 708
Joined: Sun. Jan. 18, 2015 10:26 am
Location: SW Lancaster County
Stoker Coal Boiler: Bairmatic-Van Wert
Hand Fed Coal Boiler: Van Wert VW85H
Hand Fed Coal Stove: Saey Hanover II working when I feel the desire, Waterford 105 out on vacation, Surdiac Gotha hiding somewhere
Coal Size/Type: pea/nut/rice/stove-anthracite, nut/stove bit when I feel the urge
Other Heating: oil fired hydronic

Post by BunkerdCaddis » Sun. Oct. 16, 2022 10:11 pm

Little old Gravity wagons make great coal bins :yes:

Attachments

DRS_xsi-7608.jpg

Gravity Wagon Coal Bin

.JPG | 109.8KB | DRS_xsi-7608.jpg

 
Crazyfarmer
Member
Posts: 99
Joined: Tue. Nov. 17, 2020 7:35 pm
Hand Fed Coal Boiler: Eagle foundry company BELLEVille Illinois 42L 16

Post by Crazyfarmer » Thu. Oct. 27, 2022 11:13 pm

How do the tires hold up on these when they’re fully loaded for a long period of time I was looking into getting one but I’m afraid I’m going to have leftover coal and then the tires are going to either sink or split.

 
k-2
Member
Posts: 1798
Joined: Thu. Sep. 28, 2017 10:57 am
Location: Coal Township Pa
Stoker Coal Boiler: K2- Keystoker
Hot Air Coal Stoker Stove: Alaska Stoker Stove
Coal Size/Type: Rice

Post by k-2 » Fri. Oct. 28, 2022 12:10 am

My stoker is in the basement and since the coal would be stored one floor above just behind the house above where the stoker is I cut a 4 in hole thru the concrete and installed a Pvc pipe at about a 45 deg angle right into the hopper. Saved me a ton of work over the last 20 years. Nice thing about it is the coal moves so slow into the hopper i dont get a speck of coal dust in the house.

 
waytomany?s
Member
Posts: 3914
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Fri. Oct. 28, 2022 7:16 am

Crazyfarmer wrote:
Thu. Oct. 27, 2022 11:13 pm
How do the tires hold up on these when they’re fully loaded for a long period of time I was looking into getting one but I’m afraid I’m going to have leftover coal and then the tires are going to either sink or split.
What kind of farmer doesn't know those answers?

 
waytomany?s
Member
Posts: 3914
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Fri. Oct. 28, 2022 7:16 am

k-2 wrote:
Fri. Oct. 28, 2022 12:10 am
My stoker is in the basement and since the coal would be stored one floor above just behind the house above where the stoker is I cut a 4 in hole thru the concrete and installed a Pvc pipe at about a 45 deg angle right into the hopper. Saved me a ton of work over the last 20 years. Nice thing about it is the coal moves so slow into the hopper i dont get a speck of coal dust in the house.
Do you have pictures of that setup?


 
User avatar
warminmn
Member
Posts: 8174
Joined: Tue. Feb. 08, 2011 5:59 pm
Location: Land of 11,842 lakes
Hand Fed Coal Stove: Chubby Junior, Riteway 37
Coal Size/Type: nut and stove anthracite, lignite
Other Heating: Wood and wear a wool shirt

Post by warminmn » Fri. Oct. 28, 2022 9:06 am

Crazyfarmer wrote:
Thu. Oct. 27, 2022 11:13 pm
How do the tires hold up on these when they’re fully loaded for a long period of time I was looking into getting one but I’m afraid I’m going to have leftover coal and then the tires are going to either sink or split.
Put in place and take the tires off. Use a lumber frame for it to sit on.... or if your going to leave it there a decade just let the tires rot if you dont care. If you have a way to get the coal there you could have it in place before filling it. I guess it all depends on how high it needs to be and personal preference.

Theres a hundred uses for those wagons and lots of them around. I like your method with it K2. Sounds real simple.

 
k-2
Member
Posts: 1798
Joined: Thu. Sep. 28, 2017 10:57 am
Location: Coal Township Pa
Stoker Coal Boiler: K2- Keystoker
Hot Air Coal Stoker Stove: Alaska Stoker Stove
Coal Size/Type: Rice

Post by k-2 » Fri. Oct. 28, 2022 9:20 am

waytomany?s wrote:
Fri. Oct. 28, 2022 7:16 am
Do you have pictures of that setup?
Ill take one.

 
waytomany?s
Member
Posts: 3914
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Fri. Oct. 28, 2022 11:07 am

waytomany?s wrote:
Fri. Oct. 28, 2022 7:16 am
What kind of farmer doesn't know those answers?
Sorry, meant that to be a smart ass remark. Rereading it , it sounds bad. My apologies.

 
hank2
Member
Posts: 854
Joined: Sat. Dec. 10, 2011 4:07 pm
Location: Berks County
Hand Fed Coal Stove: DS Machine 1400 WH ciculator; 1880's small cannon in reserve
Coal Size/Type: Nut
Other Heating: small New Yorker oil fired boiler; mostly used for domestic HW

Post by hank2 » Fri. Oct. 28, 2022 12:41 pm

christack wrote:
Sun. Oct. 16, 2022 8:33 pm
Been wanting to build a coal ben. I started out was going to buy a dumpster and they was $350 and then have to cut the bottom out and fix he bottom so the coal would go down . So I look at building it out of wood and wood is so high now that I was looking around 4 to $500 for wood . So I ask a friend since he is a farmer if they had anything like what I need . So here is what I come up with. Its called a Graivty Wagon . Got this baby for $450 and its 12ft long and 6ft wide and 3ft deep just from the square part not counting the belly of the wagon . It should hold 7.5 ton of coal and next is going to be weld and modify the bottom for my aurger. This is the start of it and I will post pictures as I get it done. Hopefully I will make this thing work and i can feed my coal in my hopper in my basement .
What a good buy! In my area that gravity bin would likely be at least $2k or more.

 
Crazyfarmer
Member
Posts: 99
Joined: Tue. Nov. 17, 2020 7:35 pm
Hand Fed Coal Boiler: Eagle foundry company BELLEVille Illinois 42L 16

Post by Crazyfarmer » Fri. Oct. 28, 2022 2:40 pm

waytomany?s wrote:
Fri. Oct. 28, 2022 7:16 am
What kind of farmer doesn't know those answers?
Haha a crazy one! 🙃🙃🙃🙃❤️

 
Crazyfarmer
Member
Posts: 99
Joined: Tue. Nov. 17, 2020 7:35 pm
Hand Fed Coal Boiler: Eagle foundry company BELLEVille Illinois 42L 16

Post by Crazyfarmer » Fri. Oct. 28, 2022 2:43 pm

🤗thanks for the great ideas same thing the cheapest they found here is over $1000 quote=warminmn post_id=806598 time=1666962365 user_id=7418]
Put in place and take the tires off. Use a lumber frame for it to sit on.... or if your going to leave it there a decade just let the tires rot if you dont care. If you have a way to get the coal there you could have it in place before filling it. I guess it all depends on how high it needs to be and personal preference.

Theres a hundred uses for those wagons and lots of them around. I like your method with it K2. Sounds real simple.
[/quote]

 
Boxhopper
New Member
Posts: 7
Joined: Thu. Oct. 20, 2022 8:05 am
Stoker Coal Boiler: Yellow flame stoker
Coal Size/Type: Rice
Other Heating: Oil

Post by Boxhopper » Tue. Nov. 15, 2022 6:39 pm

Old oil tank with the top curve does great too!

 
User avatar
BunkerdCaddis
Member
Posts: 708
Joined: Sun. Jan. 18, 2015 10:26 am
Location: SW Lancaster County
Stoker Coal Boiler: Bairmatic-Van Wert
Hand Fed Coal Boiler: Van Wert VW85H
Hand Fed Coal Stove: Saey Hanover II working when I feel the desire, Waterford 105 out on vacation, Surdiac Gotha hiding somewhere
Coal Size/Type: pea/nut/rice/stove-anthracite, nut/stove bit when I feel the urge
Other Heating: oil fired hydronic

Post by BunkerdCaddis » Tue. Nov. 15, 2022 9:03 pm

Boxhopper wrote:
Tue. Nov. 15, 2022 6:39 pm
Old oil tank with the top curve does great too!
Shoot, now there's an idea... :annoyed:

Although 250 gallons is only about 33 cubic feet which is less than a ton...


Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”