Harman vs hitzer
-
- Member
- Posts: 114
- Joined: Thu. Aug. 27, 2020 11:44 am
Harman dvc 500 or a hitzer 608 which stove is king and why?
-
- Member
- Posts: 114
- Joined: Thu. Aug. 27, 2020 11:44 am
I have one of each now sitting in the garage that I remodeled both and I’m gonna put one of these down in my basement but haven’t decided which one yet the Harman is a direct vent. Hitzer is a power vent but could change it to and exterior chimney
-
- Member
- Posts: 3966
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
Which one is lighter?
-
- Member
- Posts: 114
- Joined: Thu. Aug. 27, 2020 11:44 am
I believe there both within 50lbs of eachother at 500 lbs according to online specs
-
- Member
- Posts: 54
- Joined: Sat. Jan. 12, 2013 5:44 am
- Location: Great Meadows NJ
- Stoker Coal Boiler: Harman DVC, Keystoker Koker, EFM-AF, EFM-520 Boiler
I have used the harman DVC in the past, you are going to love it if you gp that route.
It is cleaner and easier to maintain
I would use the hitzer with a chimney since it supports more BTU, for direct vent or power vent i would go Harman
It is cleaner and easier to maintain
I would use the hitzer with a chimney since it supports more BTU, for direct vent or power vent i would go Harman
-
- Member
- Posts: 3966
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
Good points. Plus 1.