Alaska Channing III blower motor.

Post Reply
 
mlg172
New Member
Posts: 3
Joined: Sun. Feb. 18, 2007 12:42 pm

Post by mlg172 » Sun. Jul. 24, 2022 4:01 pm

My 6 year old Channing III blower motor failed at the end of last season. What’s a good replacement? The part number on the existing blower is 33S5VSB-01. I could only find 33S5VSB-03 online. And found a post on here from 2018 that said Dayton 1TDR3. All help appreciated. Thanks.

 
User avatar
freetown fred
Member
Posts: 30302
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Sun. Jul. 24, 2022 5:02 pm

Check GRAINGER.


 
User avatar
McGiever
Member
Posts: 10130
Joined: Sun. May. 02, 2010 11:26 pm
Location: Junction of PA-OH-WV
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hand Fed Coal Stove: Warm Morning 414A
Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
Other Heating: Ground Source Heat Pump and some Solar

Post by McGiever » Fri. Jul. 29, 2022 10:16 am

You might have been very pleased with your original motor, some thoughts below if it matters …

Ball bearings sure beats sleeve bearings…

PSC motor sure beats shaded-pole motor…

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”