I have a 2007 Harman Magnum Stoker that I am putting a new glass in. I have the glass and flat gasket, my question is where is the right place too put the gasket ?, on the main door where the bolts go thru or on the piece that the bolts screw into, ( I think they call it the window trim) and also the clips. I do know that it only goes on vertical side of glass. I have a feeling it was not right from new.
Second question is what asbestos rope size for doors, 3/8" or 1/2 " I have seen some say either or. Just trying to do it right. Owners manual gives no directions for replacing things, or dimensions
2007 Harman Magnum Stoker
- bigstick6017555
- Member
- Posts: 744
- Joined: Mon. Jan. 12, 2009 8:10 pm
- Location: Narvon 17555
- Hot Air Coal Stoker Stove: Harman Magnum
- Coal Size/Type: rice
- bigstick6017555
- Member
- Posts: 744
- Joined: Mon. Jan. 12, 2009 8:10 pm
- Location: Narvon 17555
- Hot Air Coal Stoker Stove: Harman Magnum
- Coal Size/Type: rice
https://www.stove-parts-unlimited.com/harman-wind ... 232547.htm
Anyone know it these are needed and how many
Anyone know it these are needed and how many