Harman mag stoker
-
GAMESNIPER
- Member
- Posts: 93
- Joined: Mon. Apr. 09, 2007 10:18 am
Hi guys anyone know the size of screws that hold panel in ash door.Panel is behind tile 4 Phillips head screws wanna get screws before trying to get them out hope I can just weld nuts on srew heads and turn out replies would be appreciated
Attachments
-
2001Sierra
- Member
- Posts: 2211
- Joined: Wed. May. 20, 2009 8:09 am
- Location: Wynantskill NY, 10 miles from Albany
- Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
- Coal Size/Type: Rice
- Other Heating: Buderus Oil Boiler 3115-34
Wow is that a new stove? If it is new I am sure Alternative Heating could answer the question.
-
GAMESNIPER
- Member
- Posts: 93
- Joined: Mon. Apr. 09, 2007 10:18 am
That picture was when I installed it probably 10 years ago
-
McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
New Magnum Stoves were changed and called "Super Magnum" even before AHS got in the game.
Tiles had been discontinued even before Supers went into production.
I have a Magnum parts list here, but nothing listed for any common small hardware.
No stove here to look at either.
Tiles had been discontinued even before Supers went into production.
I have a Magnum parts list here, but nothing listed for any common small hardware.
No stove here to look at either.