LL Hearth Fireplace Dimensions

A Coal stoker furnace or stove controls most operations including automatically feeding the coal. They are quite similar to any conventional oil and gas units and easily operated for extended periods of time. They commonly use rice coal but may use larger sizes like buckwheat. They can be used as primary heat, supplementary heat or have a dual set up with your existing oil/gas furnace.
Post Reply
speerstra
Member
Posts: 29
Joined: Wed. Jul. 02, 2008 11:11 am

Post Thu. Jul. 10, 2008 10:14 am

Hi,
Was looking for information about minimum fireplace/flu sizing for the hearth model. Where can I find this?
Thanks,
Speerstra

User avatar
gambler
Member
Posts: 1594
Joined: Mon. Jan. 29, 2007 12:02 pm
Stove/Furnace Make: Leisure Line
Stove/Furnace Model: Pioneer
Location: western Pa

Post Thu. Jul. 10, 2008 12:16 pm

Take Care and God Bless
Rick


speerstra
Member
Posts: 29
Joined: Wed. Jul. 02, 2008 11:11 am

Post Thu. Jul. 10, 2008 12:22 pm

Thanks. All I see is the info below:
Specs: 5,000 – 90,000 BTU Input, Height 33.5”, Depth 21”, Width 39”, Hopper Capacity 70 lbs, 212 CFM blower, 6” Back Vent flue, Weight 232 lbs, Hearth Depth w/o Front Support 14”.
I assume the dimensions are of the entire unit not the piece that fits in the fireplace? If so what is the min fireplace sizing for this unit? Also what exactly does Hearth Depth w/o Front Support 14” mean?

speerstra
Member
Posts: 29
Joined: Wed. Jul. 02, 2008 11:11 am

Post Thu. Jul. 10, 2008 3:31 pm

Talked to Jerry. Busy man. Sounds as though no part of the stove fits in the fireplace. It all sits on the step in front of the fireplace. The step must be 14" or more.

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”