What coal stoker do I have?

 
User avatar
Tifford
Member
Posts: 81
Joined: Sat. Mar. 04, 2017 7:58 pm
Location: Central NY
Stoker Coal Boiler: Econo 1 by Leisure Line
Coal Size/Type: Rice

Post by Tifford » Tue. Mar. 19, 2019 7:09 pm

Update,
Next up will be putting in the leisure line stove. Finally over the bad cold or flu I had AND I got the shear pin replaced.

Finally had a day where it was warm enough to work outside. The snow from this morning had melted and I was able to work out in the sunshine.

I got a 2x6 about 6feet long and wedged it between the auger and the side wall of the snow blower. It was just enough to line up the holes left to right. With my head pressing on the board I used a hammer and a punch to drive out the old shear pin. New shear pin is in.

Attachments

20190319_173648.jpg
.JPG | 356.9KB | 20190319_173648.jpg

 
User avatar
Hambden Bob
Member
Posts: 8536
Joined: Mon. Jan. 04, 2010 10:54 am
Location: Hambden Twp. Geauga County,Ohio
Hot Air Coal Stoker Stove: Harman 1998 Magnum Stoker
Hand Fed Coal Stove: Blower Model Coal Chubby 1982-Serial#0097
Coal Size/Type: Rice-A-Roni ! / Nut
Other Heating: Pro-Pain Forced Air

Post by Hambden Bob » Wed. Mar. 20, 2019 5:40 am

Good Deal! Give Yourself every chance for this install to fly right! Start with a cleaned and inspected by You Flue,Get a Manometer for measuring Draft,and a CO Monitor or two. Try not to hate Yourself for helping out the Old Girl next door. Your trying to keep it a Secret that You're a Good Guy!!


 
User avatar
Tifford
Member
Posts: 81
Joined: Sat. Mar. 04, 2017 7:58 pm
Location: Central NY
Stoker Coal Boiler: Econo 1 by Leisure Line
Coal Size/Type: Rice

Post by Tifford » Wed. Mar. 20, 2019 6:36 pm

Hope to get started tomorrow.

 
User avatar
StanT
Member
Posts: 261
Joined: Fri. Aug. 29, 2008 5:10 am
Location: Ne Pa

Post by StanT » Wed. Mar. 20, 2019 11:04 pm

Let us know how you make out Please?

Thanks, Stant

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”