Update,
Next up will be putting in the leisure line stove. Finally over the bad cold or flu I had AND I got the shear pin replaced.
Finally had a day where it was warm enough to work outside. The snow from this morning had melted and I was able to work out in the sunshine.
I got a 2x6 about 6feet long and wedged it between the auger and the side wall of the snow blower. It was just enough to line up the holes left to right. With my head pressing on the board I used a hammer and a punch to drive out the old shear pin. New shear pin is in.
What coal stoker do I have?
- Hambden Bob
- Member
- Posts: 8535
- Joined: Mon. Jan. 04, 2010 10:54 am
- Location: Hambden Twp. Geauga County,Ohio
- Hot Air Coal Stoker Stove: Harman 1998 Magnum Stoker
- Hand Fed Coal Stove: Blower Model Coal Chubby 1982-Serial#0097
- Coal Size/Type: Rice-A-Roni ! / Nut
- Other Heating: Pro-Pain Forced Air
Good Deal! Give Yourself every chance for this install to fly right! Start with a cleaned and inspected by You Flue,Get a Manometer for measuring Draft,and a CO Monitor or two. Try not to hate Yourself for helping out the Old Girl next door. Your trying to keep it a Secret that You're a Good Guy!!