I have a keystoker 90k and have this blower, need to know how many cfm
blower is big almost touches the floor but how many cfm??
All specs are there 3.4 2.9 amps
1585 rpm
motor LR34751
model 7008-7121
says hp 1/12 ??
Fasco blower which cfm??
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
That tag shows only Motor info.
The Motor fits many applications all different
Keysroker knows
The Motor fits many applications all different
Keysroker knows
Last edited by McGiever on Tue. Feb. 05, 2019 6:09 pm, edited 1 time in total.
- McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
Parts list
- Squid3083
- Member
- Posts: 45
- Joined: Tue. Dec. 25, 2018 2:30 am
- Location: Quebec, Canada
- Hot Air Coal Stoker Stove: Keystoker 90K
- Coal Size/Type: rice
lol and if it was replaced ??
I have manuals that came with this over 10 years old stove but no part list
All examples of morot tags on blowers had cfm rating written on it.
I want to know if this is the original 265 cfm or 360 or 500 cfm
I need to put the air output on ducts for 40 feet even if the velocity is low.
It will put heat in my house more evenly.
I have manuals that came with this over 10 years old stove but no part list
All examples of morot tags on blowers had cfm rating written on it.
I want to know if this is the original 265 cfm or 360 or 500 cfm
I need to put the air output on ducts for 40 feet even if the velocity is low.
It will put heat in my house more evenly.