safe to leave coal stove running for a few hours?
- darnskewered
- Member
- Posts: 30
- Joined: Fri. Jan. 11, 2019 2:11 pm
- Hot Air Coal Stoker Stove: Harman Magnum Stoker
- Coal Size/Type: Anthracite Rice Coal
Do you ever leave your coal stove running without anybody in the house or do you usually shut it down? It's hard enough to restart I wouldn't want to do this if I didn't have to. We have 3 cats so I'd just worry if something went wrong and carbon monoxide filled up the house while we were gone or something.
- warminmn
- Member
- Posts: 8190
- Joined: Tue. Feb. 08, 2011 5:59 pm
- Location: Land of 11,842 lakes
- Hand Fed Coal Stove: Chubby Junior, Riteway 37
- Coal Size/Type: nut and stove anthracite, lignite
- Other Heating: Wood and wear a wool shirt
I dont use a stoker but I light my stove in the fall and let it go out in the spring with no outfires if possible. Make sure your chimney is clear and your stove running well and there shouldnt be any issues. Check your chimney reasonably often for ash buildup. CO detectors are a must as you probably know.
You could put your cats in a closed off room when not home if that is your main concern.
Another thing some on here do is some sort of remote viewing, so they can check things when they are gone by viewing them online. I would think you could do that with a CO detector with digital display if you wanted too. It is way over my head on how they hook those up.
You could put your cats in a closed off room when not home if that is your main concern.
Another thing some on here do is some sort of remote viewing, so they can check things when they are gone by viewing them online. I would think you could do that with a CO detector with digital display if you wanted too. It is way over my head on how they hook those up.
I leave the house with it running all the time. Fired up in Nov & will shut down probably in April. A dog and two cats here.
I have a manometer connected to measure the draft and it stays about -.02 during idle fire periods. It gets to -.04 when firing on long 'stat calls for heat. The point is I make sure to have draft and not get too low during idle fires for peace of mind. If days get to mid 50's or higher and the stove is running I cover the baro with foil.
I also have a CO monitor in the basement with the stoker that I make sure the peak reading is always 0.
It is a good thing to be concerned about CO. Take precautions and have monitors and alarms.
I have a manometer connected to measure the draft and it stays about -.02 during idle fire periods. It gets to -.04 when firing on long 'stat calls for heat. The point is I make sure to have draft and not get too low during idle fires for peace of mind. If days get to mid 50's or higher and the stove is running I cover the baro with foil.
I also have a CO monitor in the basement with the stoker that I make sure the peak reading is always 0.
It is a good thing to be concerned about CO. Take precautions and have monitors and alarms.
- Rob R.
- Site Moderator
- Posts: 18004
- Joined: Fri. Dec. 28, 2007 4:26 pm
- Location: Chazy, NY
- Stoker Coal Boiler: EFM 520
- Hand Fed Coal Stove: Chubby Jr
I treat mine just like the oil boiler.darnskewered wrote: ↑Mon. Jan. 28, 2019 2:14 pmDo you ever leave your coal stove running without anybody in the house or do you usually shut it down? It's hard enough to restart I wouldn't want to do this if I didn't have to. We have 3 cats so I'd just worry if something went wrong and carbon monoxide filled up the house while we were gone or something.
- Richard S.
- Mayor
- Posts: 15243
- Joined: Fri. Oct. 01, 2004 8:35 pm
- Location: NEPA
- Stoker Coal Boiler: Van Wert VA1200
- Coal Size/Type: Buckwheat/Anthracite
Typical source of CO when using coal is a blocked flue pipe or chimney, almost 100% of the time. As long as you are keeping an eye on the fly ash this is a very unlikely event.
-
- Member
- Posts: 2706
- Joined: Fri. Jan. 26, 2007 9:55 pm
- Location: Birdsboro PA.
- Stoker Coal Boiler: EFM 350
- Hot Air Coal Stoker Furnace: reading allegheny stoker
- Hot Air Coal Stoker Stove: alaska kodiak stoker 1986. 1987 triburner, 1987 crane diamond
- Coal Size/Type: rice
i light the stove in fall and put it out in the spring.
- Lightning
- Site Moderator
- Posts: 14669
- Joined: Wed. Nov. 16, 2011 9:51 am
- Location: Olean, NY
- Stoker Coal Boiler: Modified AA 130
- Coal Size/Type: Pea Size - Anthracite
I admire your concern for the well being of your pets and possible carbon monoxide poisoning. Over time you will learn to trust your coal appliance. Excellent advice above with checking for fly ash build up somewhere in the exhaust path often. Frequency wise, I would suggest checking once for every ton of coal burned until you determine it's not a problem to go longer.
Not only is there the possibility of fly ash build up, but also the possibility of chimney draft failure during warm weather. That being said, it would also be wise to have a manometer installed so that you can monitor your draft to see if it is heading for a failure during periods of warm weather or also by fly ash build up.
Not only is there the possibility of fly ash build up, but also the possibility of chimney draft failure during warm weather. That being said, it would also be wise to have a manometer installed so that you can monitor your draft to see if it is heading for a failure during periods of warm weather or also by fly ash build up.
-
- Member
- Posts: 97
- Joined: Thu. Aug. 09, 2018 9:24 am
- Location: Chardon, Ohio
- Hand Fed Coal Stove: DS Circulator #1500 W/ blower modification
- Coal Size/Type: Nut Coal
- Other Heating: House - Propane Forced air furnace. Garage - Hydronic in the concrete floor with Pellet stove supplement.
I started mine in mid October and still running 24/7. I see no reason to shut it down. When I had the Wood stove I was constantly tending it and if I left the house for any extended period of time like when I was working, it would be out when I got home. So only needing to fill my hopper twice a day is a real treat.
- 2001Sierra
- Member
- Posts: 2211
- Joined: Wed. May. 20, 2009 8:09 am
- Location: Wynantskill NY, 10 miles from Albany
- Hot Air Coal Stoker Stove: Keystoker 90 Chimney vent
- Coal Size/Type: Rice
- Other Heating: Buderus Oil Boiler 3115-34
I even leave my Keystoker 90 running while on vacation, with a good neighbor feeding it and the cat once a day.
- WNY
- Member
- Posts: 6307
- Joined: Mon. Nov. 14, 2005 8:40 am
- Location: Cuba, NY
- Hot Air Coal Stoker Stove: Keystoker 90K, Leisure Line Hyfire I
- Coal Size/Type: Rice
- Contact:
we are gone most of the day and have 2 cats, our stoves run 24/7 throughout the winter, usually Nov. thru Apr. depending.
I have 4 CO detectors, smoke alarms, etc..
Even my 90 year old mom kept my keystoker going while we were on vacation! I left instructions, she did very well!
I have 4 CO detectors, smoke alarms, etc..
Even my 90 year old mom kept my keystoker going while we were on vacation! I left instructions, she did very well!
-
- Member
- Posts: 143
- Joined: Wed. Aug. 27, 2008 2:18 pm
- Location: North Central MD
- Hot Air Coal Stoker Stove: Alaska Kast Console II
- Coal Size/Type: Rice
my baro and flue are set up and operating properly, and the stove runs 24/7 for the entire season. Personally, my routine for 10 years has been to shut it down off for a quick 5 minute shopvac-ing every 7-10 days, along with a few taps on the stove pipe, but the coals always stay red and it re-catches when I plug it back in.
All 3 of our cats love the stove, and would be upset if we did anything different.
In terms of something with the stove going wrong, at least for me, unless my rheostat went crazy with a constant feed (not sure that is possible and I think the fail scenario would be failure to send a current to the feed motor or corrosion may be not sending feed current often enough), the worse that would happen is the fire would go out.
All 3 of our cats love the stove, and would be upset if we did anything different.
In terms of something with the stove going wrong, at least for me, unless my rheostat went crazy with a constant feed (not sure that is possible and I think the fail scenario would be failure to send a current to the feed motor or corrosion may be not sending feed current often enough), the worse that would happen is the fire would go out.