Friend of mine picked one up from work that they where not using. Curious if anyone knows the fitting and tap needed to install by the ash door?
Once that is figured out, then I'll decide on what type of line I'll use to the manometer.
I like the nickel copper brake line, so easy to bend. Any tips would be greatly appreciated!
Thanks in advanced!
Installing a Dwyer 25 on a Keystoker Koker 160k btu.
- nepacoal
- Member
- Posts: 1696
- Joined: Wed. Nov. 21, 2012 7:49 am
- Location: Coal Country
- Stoker Coal Boiler: Keystoker KAA-4 / "Kelly" and an EFM 520 at my in-laws
- Hand Fed Coal Boiler: Harman SF-260 - retired
- Coal Size/Type: Buck
I used a bulkhead connector and high temp 3/16 ID silicone tubing on my boiler.
Eaton Weatherhead 1074X4 Brass CA360 Mini-Barb Brass Fitting, Bulkhead Union, Straight, 1/4" Tube OD
Eaton Weatherhead 1074X4 Brass CA360 Mini-Barb Brass Fitting, Bulkhead Union, Straight, 1/4" Tube OD