New Coal Burner Question
- coaledsweat
- Site Moderator
- Posts: 13767
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
This Koker, Koker Lite thing, is it a stoker or hand fired? I moved this thread thinking it a hand fired. Am I wrong?
- StokerDon
- Site Moderator
- Posts: 7496
- Joined: Mon. Nov. 11, 2013 11:17 am
- Location: PA, Southern York County!
- Stoker Coal Boiler: Gentleman Janitor GJ-5, Van Wert VA-600, Axeman Anderson130 X3.
- Hand Fed Coal Furnace: Harman SF3500 reduced down to 3 grates connected to its own plenum
- Coal Size/Type: Rice, Chestnut and whatever will fit through the door on the Harman
- Other Heating: Noth'in but COAL! Well, Maybe a little tiny bit of wood
Yup, their both stokers.coaledsweat wrote: ↑Mon. Sep. 10, 2018 4:24 pmThis Koker, Koker Lite thing, is it a stoker or hand fired? I moved this thread thinking it a hand fired. Am I wrong?
-Don
- lsayre
- Member
- Posts: 21781
- Joined: Wed. Nov. 23, 2005 9:17 pm
- Location: Ohio
- Stoker Coal Boiler: AHS S130 Coal Gun
- Coal Size/Type: Lehigh Anthracite Pea
- Other Heating: Resistance Boiler (13.5 KW), ComfortMax 75
It is a stoker that is partly a radiant stove and partly a forced air furnace. It's sort of a hybrid. It effectively begins where many basement stove owners end up after they realize that heat distribution will require a lot more thought than they initially put into their purchase.coaledsweat wrote: ↑Mon. Sep. 10, 2018 4:24 pmThis Koker, Koker Lite thing, is it a stoker or hand fired? I moved this thread thinking it a hand fired. Am I wrong?
- coaledsweat
- Site Moderator
- Posts: 13767
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
LOL, OK it's going back to the stoker forum.
-
- Member
- Posts: 376
- Joined: Sat. Nov. 11, 2017 6:32 am
- Location: Ligonier Pa.
- Hot Air Coal Stoker Furnace: Koker lite- house. Reading- garage
- Coal Size/Type: Rice
- Other Heating: Oil
I have a koker lite tied in to heat side of duct work,heat 1800 sq. Ft. 2story,does a great job for me.do cold air return also.
- VigIIPeaBurner
- Member
- Posts: 2579
- Joined: Fri. Jan. 11, 2008 10:49 am
- Location: Pequest River Valley, Warren Co NJ
- Hot Air Coal Stoker Furnace: Keystoker Koker(down)
- Hand Fed Coal Stove: Vermont Casting Vigilant II 2310
- Other Heating: #2 Oil Furnace
I studied insulating my foundation walls. What i found was it was most important and (therefore get the most return for insulation dollars) to start with the part exposed above ground to about 2-3' below grade. Spray foam was the best and i remember that open and closed cell foam worked best. What I don't remember right now was if the closed cell was on top 3-4 ' or the bottom. Part of it was supposed to breath to minimize mold formation between the block/insulation. Should be easy to search out and use the correct sheet insulation.breakingdylan wrote: ↑Mon. Sep. 10, 2018 3:49 pmYea thats what i was aiming for either the Koker or Koker LIte to help heat the floor while still throwing heat to the rest of the house. Its one of those things I just want to shut off the propane during the harsh months and just not use it. Propane bills suck. Ill work on insulating the walls with board insulation or something.