Fan limit switch settings testing

Post Reply
 
arcticcatmatt
Member
Posts: 320
Joined: Wed. Sep. 10, 2008 10:22 pm
Location: Montour Falls NY

Post by arcticcatmatt » Tue. Jan. 02, 2018 3:17 pm

Has anyone done any fan limit switch setting testing? I have a Keystoker 105 and the manual says 120 for low and 160 for high is the normal setting but it is adjustable. I used my temperature laser gun on the sidewall (double wall stove i assume) and my reading is 180 degrees when the limit switch is reading 140 so that was interesting.


Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”