cant get heat

willy37 · Post by **willy37** » Tue. Jan. 02, 2018 1:51 pm

i have a keystoker. it is feeding fine. i cleaned it out really good, poked all the holes out, cleaned under the tray, etc.. but cant seem to get enough heat pumping out. any suggestions?

Olllotj · Post by **Olllotj** » Tue. Jan. 02, 2018 2:08 pm

What model Keystoker? Stove or boiler or furnace? How big is the house? Where are you located?

Have you set your draft?

How long have you had the stove?

coalnewbie · Post by **coalnewbie** » Tue. Jan. 02, 2018 9:03 pm

A pic of the fire usually reveals much.

WNY · Post by **WNY** » Wed. Jan. 03, 2018 6:09 pm

check your feed screw, make sure it's turned in all the way and backed out about 3-4 turns. Is your thermostat calling for heat and the stoker running constantly? If it's feeding constantly, how much ash is at the end of the grates?

post a pic

Also, any other important info, like chimney or direct vent? baro damper? draft set correctly? etc....