Hey Guys
I appreciate all the info found on this site, so i value your opinions and comments.
I've been running my Hitzer 710 stoker furnace for 4 years now and god honest truth.. i have issues with parts breaking EVERY YEAR.
To be fare, its not the furnace itself, but the supplied HVAC parts.
- the supplied air pressure switch breaks every year
- the power vent motor has been replaced 3 times already. (yes, i grease the motor as suggested)
I want to know if you guys with Hitzer products are facing the same amount of faults in the parts??
anyone with a Hitzer.. are you having issues with the supplied air pressure switch
-
McGiever
- Member
- Posts: 10130
- Joined: Sun. May. 02, 2010 11:26 pm
- Location: Junction of PA-OH-WV
- Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
- Hand Fed Coal Boiler: BUCKET A DAY water heater
- Hand Fed Coal Stove: Warm Morning 414A
- Coal Size/Type: PEA,NUT,STOVE /ANTHRACITE
- Other Heating: Ground Source Heat Pump and some Solar
Those parts are not unique to Hitzer, they are used widely with other stoker stoves.
Everybody is a big fan of PV , till they get where/what you are seeing.
This PV gear is not designed for any coal service.period..
Stove stack pipe or masonry chimney will avoid all that drama, repair/replace expense and down broke loss of heat time.
Everybody is a big fan of PV , till they get where/what you are seeing.
This PV gear is not designed for any coal service.period..
Stove stack pipe or masonry chimney will avoid all that drama, repair/replace expense and down broke loss of heat time.