National 200 Coal Boiler..?

A Coal stoker furnace or stove controls most operations including automatically feeding the coal. They are quite similar to any conventional oil and gas units and easily operated for extended periods of time. They commonly use rice coal but may use larger sizes like buckwheat. They can be used as primary heat, supplementary heat or have a dual set up with your existing oil/gas furnace.
Post Reply
User avatar
Coalbrokdale
Member
Posts: 145
Joined: Wed. Feb. 13, 2008 9:02 am
Stove/Furnace Make: Harman \ Coalbrookdale
Stove/Furnace Model: VF3000 \Darby

Post Mon. Feb. 25, 2008 2:45 pm

Has anyone heard of or knows anything about a NATIONAL coal boiler?

User avatar
LsFarm
Member
Posts: 7385
Joined: Sun. Nov. 20, 2005 8:02 pm
Stoker Coal Boiler: Axeman Anderson 260
Hand Fed Coal Boiler: Self-built 'Big Bertha' SS Boiler
Baseburners & Antiques: Keystone 11, Art Garland
Location: Michigan

Post Mon. Feb. 25, 2008 4:00 pm

Do you have a photo? or any additional information?? date of manufactur, BTU capacity ?

Greg L
Burning Pea/Buckwheat through an antique stoker [semi retired SSboiler],
Running an Axeman-Anderson 260M boiler burning Pea, About 150-250#per day
Farming, Fixing, Fabricating and Flying: 'spare time' what's that?

User avatar
Coalbrokdale
Member
Posts: 145
Joined: Wed. Feb. 13, 2008 9:02 am
Stove/Furnace Make: Harman \ Coalbrookdale
Stove/Furnace Model: VF3000 \Darby

Post Mon. Feb. 25, 2008 4:11 pm

Just seen a couple of adds for them.

NATIONAL #200 coal boiler, 5 cast sections, good grates, 160-200,000 BTU's, B&G pump, $1,795,

pickupman2002
New Member
Posts: 2
Joined: Wed. Feb. 25, 2009 9:09 pm

Post Wed. Feb. 25, 2009 9:11 pm

they are good boilers they burn soft coal. where did you find the add im curently looking for one


Munchinman
New Member
Posts: 1
Joined: Tue. Sep. 22, 2009 11:56 pm
Stove/Furnace Make: national
Stove/Furnace Model: 200

Post Wed. Sep. 23, 2009 12:16 am

I have installed a couple of OLD National 200 coal boilers.I am not 100% Positve but I think they stopped making these boilers in the late 50's or early 60's.You can still find many in use.They are a cast iron boiler that came apart in sections.They are large and have a seperate ash pit on the bottom.If my memory serves me there is a hardware store in curwensville,Pa that still sells parts for them.

User avatar
Tim
Member
Posts: 326
Joined: Wed. Apr. 15, 2009 8:49 am
Stove/Furnace Make: Glenwood
Stove/Furnace Model: Oak #30
Location: Grampian, PA

Post Wed. Sep. 23, 2009 8:20 am

In Curwensville Pa, we have 2 hardware stores.
Gates Hardware
True Value
I would think it would be True Value, they bought out C-Ville heating & plumbing wich was in there basement now all under one owner, down in that basement wich is HUGE they have more (OLD) parts than you can imagine!
Tim

phantasom
New Member
Posts: 6
Joined: Wed. Oct. 07, 2009 9:50 pm

Post Thu. Oct. 08, 2009 11:10 am

I need a center section for a model 300 National boiler if any one knows where to get one I would be thankfull
Thanks
Scott

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”