Coal Trol on an EFM AF150?

Post Reply
 
lincolnmania
Member
Posts: 2684
Joined: Fri. Jan. 26, 2007 9:55 pm
Location: Birdsboro PA.
Stoker Coal Boiler: EFM 350
Hot Air Coal Stoker Furnace: reading allegheny stoker
Hot Air Coal Stoker Stove: alaska kodiak stoker 1986. 1987 triburner, 1987 crane diamond
Coal Size/Type: rice

Post by lincolnmania » Sun. Dec. 16, 2007 8:29 am

i was considering buying the will burt timer and stat setup for the efm stoker......the timer alone is over 300 bucks......would the coal-trol work for my application? it's an efm af150 forced air stoker, mfg 1982.......also I have an alaska stoker mfg 1986....tag on the back says it's a kodiak, but it's not their hand fed stove (very similar to the reading stoves....i bought a motor from reading stove when the alaska motor died) do you offer a discount if I would order two units?


 
User avatar
pvolcko
Verified Business Rep.
Posts: 1063
Joined: Mon. Jan. 16, 2006 4:26 pm
Location: Syracuse, NY
Contact:

Post by pvolcko » Sun. Dec. 16, 2007 5:09 pm

Please call us at 315-299-3589 to discuss your application. As a general matter we have run the Coal-trol on at least a few auger fed coal stokers before with good results. We've also run big blowers (wired for low speed) with good results. When you call make sure to have the current rating information for the stoker/combustion blower and the convection blower.

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”