Pocono Coal Feed Motor
We have no dealer in area. The motor for coal feed looks to be a general small motor but can not find a name or model number. I would like to pick up a spare since stove has been run for 3 seasons and don't want to shut down. What motor should I look for if need to replace.
-
- Member
- Posts: 1923
- Joined: Mon. Oct. 02, 2006 8:59 am
- Location: Berwick, PA and Ormand Beach FL
The feed gear motor is a 1.5 RPM 120 VAC motor with a 5/16 -18 NC thread out put shaft, it is made by glkeason Avery in Aburn NY.
Not sure if you get to either of the following locations:
22.3 miles
Ashlee Stove and Coal Shoppe, 48 Main St, Lincoln, ME 04457
Phone: 207-794-2930, Dave (Owner)
52.9 miles
Aroostok Milling Company Inc, 15 Millview Ave, Houlton, ME 04730
Phone: 207-532-6130, [email protected]
If you contact one of these dealers they can most probably take your credit card info over the phone and have the part shipped direct to save you a trip (if not give us a call at [Phone Number Removed] and we can get you a feeder motor shipped direct).
Thank you for buying our products and stay warm.
Not sure if you get to either of the following locations:
22.3 miles
Ashlee Stove and Coal Shoppe, 48 Main St, Lincoln, ME 04457
Phone: 207-794-2930, Dave (Owner)
52.9 miles
Aroostok Milling Company Inc, 15 Millview Ave, Houlton, ME 04730
Phone: 207-532-6130, [email protected]
If you contact one of these dealers they can most probably take your credit card info over the phone and have the part shipped direct to save you a trip (if not give us a call at [Phone Number Removed] and we can get you a feeder motor shipped direct).
Thank you for buying our products and stay warm.