Hopper Gasket Replacement

Post Reply
ewcsretired
Member
Posts: 57
Joined: Sun. Oct. 29, 2006 1:03 pm
Location: Wellsboro, PA

Post Tue. Sep. 11, 2007 5:59 pm

I removed the hopper this year to install the jacket and replaced the gasket in the two areas that the hopper sits on. I hope I got a good seal but cant be sure as I cant see how its fitting once the hopper is back in place. How critical is this seal, should I be concerned?


Jerry & Karen
Member
Posts: 381
Joined: Mon. Jan. 23, 2006 7:30 pm
Location: Berwick, pa
Contact:

Post Tue. Sep. 11, 2007 7:42 pm

Don't be concerned at all. The reason for the gasket on the hopper is for vibration. Metal against metal with the fans running will drive you crazy. Also, make sure your rust preventer in non-combustable.
Jerry

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”