Hyfire II 512K Fans

A Coal stoker furnace or stove controls most operations including automatically feeding the coal. They are quite similar to any conventional oil and gas units and easily operated for extended periods of time. They commonly use rice coal but may use larger sizes like buckwheat. They can be used as primary heat, supplementary heat or have a dual set up with your existing oil/gas furnace.
ewcsretired
Member
Posts: 57
Joined: Sun. Oct. 29, 2006 1:03 pm
Location: Wellsboro, PA

Post Sat. Sep. 25, 2010 6:40 pm

Well it was April, then June and first week in September. Still nothing, maybe next season, got to get my Hyfire up and running with a new booster fan.

User avatar
Matthaus
Verified Business Rep.
Posts: 1929
Joined: Mon. Oct. 02, 2006 8:59 am
Stoker Coal Boiler: Leisure Line WL110 Dual Fuel, natural gas
Hot Air Coal Stoker Stove: Leisure Line Lil' Heater (rental house)
Coal Size/Type: Rice and Buckwheat Anthracite
Location: Wilkes Barre, PA

Post Wed. Sep. 29, 2010 12:05 pm

I have some test pieces of sheet metal for you (free of charge if you agree to help evaluate their fitness for prime time). PM me with an address And I'll send them with a part number and source for the fans.

Thanks for your patience and continued contribution to the forum. :oops:
Matthaus
Leisure Line Stove Company
http://www.leisurelinestoves.com/


User avatar
Matthaus
Verified Business Rep.
Posts: 1929
Joined: Mon. Oct. 02, 2006 8:59 am
Stoker Coal Boiler: Leisure Line WL110 Dual Fuel, natural gas
Hot Air Coal Stoker Stove: Leisure Line Lil' Heater (rental house)
Coal Size/Type: Rice and Buckwheat Anthracite
Location: Wilkes Barre, PA

Post Thu. Oct. 07, 2010 4:00 pm

At long last actual photos of the fan kit parts and oe fan installed. This kit will be available through your dealer (after you tell them about it! LOL)all you have to provide are the fans (Dayton 1TDR9, 4C264, 4C448 or Fasco B45267, AO Smith #563, run on high speed for those units that are 2 speed). Retail price will be around $75 to $85, not exactly sure yet. We have a pair sent to ewcsretired for product evaluation. Let us know if you would like to participate in that.

The units are mountable on either side before you glue on the small piece of hopper gasket, but that can be changed to the other side if need be. Tools needed are a 7/16" wrench and a 1/4" drive ratchet with extension and deep wall six point 7/16" socket. These will not fit the older Hyfires with the 160 CFM fans but we are working on that as well. ;)

There is a slide on each side for tuning and release of air along the side of the stove. We are also working on an adapter for the hot air jacket so that the sides of the stove will be washed of heat under fan pressure.
Attachments
10_7-2010 030.JPG
Rear view of fan installed
10_7-2010 033.JPG
There is a slide to allow blowing air up the side of the stove or into the hot air jacket opening
10_7-2010 024.JPG
There is a small piece of hopper gasket that acts as a spacer because the cut out in the wrap holds up the adapter flange from mating
Matthaus
Leisure Line Stove Company
http://www.leisurelinestoves.com/

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”