Page 2 of 2
Re: Hyfire II Is Cool
Posted: Thu. Nov. 05, 2009 2:21 pm
by ncountry
Thanks for the help and suggestions. We turned the max feed rate up to 60 today and it was 80+ in the house in 1 hour. Thanks again , Mason
Re: Hyfire II Is Cool
Posted: Thu. Nov. 05, 2009 2:51 pm
by gambler
Freddy wrote:The manomometer that Gambler gave a link to is not the correct one foe coal. That one is a #27, for coal it needs to be the #25. The 27 just doesn't give a fine enough reading.
Sorry, I didn't even read the link. I just saw it in the for sale section.
Re: Hyfire II Is Cool
Posted: Thu. Nov. 05, 2009 3:28 pm
by coal berner
Freddy wrote:The manomometer that Gambler gave a link to is not the correct one foe coal. That one is a #27, for coal it needs to be the #25. The 27 just doesn't give a fine enough reading.
Yes it can be used for coal all you will be reading is the 4 or 5 lines between 0 |||||| .1
each line is .01 .02 .03 .04 .05 I use a # 26 mark II w/ Blue dye 0 to 7 not hard to read or use
Re: Hyfire II Is Cool
Posted: Fri. Nov. 06, 2009 12:35 am
by Matthaus
ncountry, from the looks of your last post problem is solved, let us know if that is not the case. Thanks everyone for your replies!
Re: Hyfire II Is Cool
Posted: Fri. Nov. 06, 2009 7:14 am
by WNY
Matthaus....We're there for ya!
We know you are busy learning the ropes.....
Re: Hyfire II Is Cool
Posted: Fri. Nov. 06, 2009 4:22 pm
by Matthaus
WNY wrote:Matthaus....We're there for ya!
We know you are busy learning the ropes.....
Thanks Dave, at least we now have worldship up and running so now we can get the packages out!
