CO2 ALARM/AUTO SHUT OFF

User avatar
McGiever
Member
Posts: 7030
Joined: Sun. May. 02, 2010 11:26 pm
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hot Air Coal Stoker Furnace: Converted Riteway into a Stoker Fed
Hot Air Coal Stoker Stove: Harman Magnum
Hand Fed Coal Stove: Warm Morning 414A
Baseburners & Antiques: Our Glenwood 111 ; Art Garland 130 ; Favorite 513
Coal Size/Type: RICE,PEA,NUT,STOVE /ANTHRACITE and EGG / BIT
Other Heating: Ground Source Heat Pump and some Solar
Location: Junction of PA-OH-WV

Post By: McGiever » Thu. Dec. 07, 2017 1:00 am


User avatar
David...
Member
Posts: 187
Joined: Sun. Nov. 06, 2016 9:48 am
Hand Fed Coal Boiler: Franks 80k output
Hand Fed Coal Stove: Jotul 507B
Coal Size/Type: Nut
Location: RI

Post By: David... » Thu. Dec. 07, 2017 12:39 pm

I'm wondering why the system didn't shut down on the thermal safety switch that should be in the flue?

David

DENNIS BAUER
Member
Posts: 236
Joined: Tue. Jan. 13, 2015 8:49 am
Hot Air Coal Stoker Stove: Keystoker 105 - SOLD
Hand Fed Coal Stove: Hitzer 30-95 - Garage
Hand Fed Coal Furnace: HITZER 50-93 - HOUSE
Coal Size/Type: NUT
Other Heating: PROPANE FURNACE, ELECTIC BASE BOARD, AND WOOD FIRE PLACE
Location: Springwater NY, (Western NY)

Post By: DENNIS BAUER » Thu. Dec. 07, 2017 2:15 pm

David... wrote:
Thu. Dec. 07, 2017 12:39 pm
I'm wondering why the system didn't shut down on the thermal safety switch that should be in the flue?

David
I'm guess this is the switch for the power vent if it looses draft or pressurizes the box. That is installed in the fire box as per LL. directions.

If that is wrong it can be moved.

Visit Alternate Heating Sytems

DENNIS BAUER
Member
Posts: 236
Joined: Tue. Jan. 13, 2015 8:49 am
Hot Air Coal Stoker Stove: Keystoker 105 - SOLD
Hand Fed Coal Stove: Hitzer 30-95 - Garage
Hand Fed Coal Furnace: HITZER 50-93 - HOUSE
Coal Size/Type: NUT
Other Heating: PROPANE FURNACE, ELECTIC BASE BOARD, AND WOOD FIRE PLACE
Location: Springwater NY, (Western NY)

Post By: DENNIS BAUER » Thu. Dec. 07, 2017 2:21 pm

McGiever wrote:
Thu. Dec. 07, 2017 1:00 am
from the archives:

Need a Combustion Gas Shut Off
Good fine, I think we might be able to make that low voltage option work if we can find a 110v relay that will turn off with the low voltage not on. I guess the opposite of what a furnace relay would do.

User avatar
McGiever
Member
Posts: 7030
Joined: Sun. May. 02, 2010 11:26 pm
Stoker Coal Boiler: AXEMAN-ANDERSON 130 "1959"
Hand Fed Coal Boiler: BUCKET A DAY water heater
Hot Air Coal Stoker Furnace: Converted Riteway into a Stoker Fed
Hot Air Coal Stoker Stove: Harman Magnum
Hand Fed Coal Stove: Warm Morning 414A
Baseburners & Antiques: Our Glenwood 111 ; Art Garland 130 ; Favorite 513
Coal Size/Type: RICE,PEA,NUT,STOVE /ANTHRACITE and EGG / BIT
Other Heating: Ground Source Heat Pump and some Solar
Location: Junction of PA-OH-WV

Post By: McGiever » Thu. Dec. 07, 2017 2:38 pm

DENNIS BAUER wrote:
Thu. Dec. 07, 2017 2:15 pm
I'm guess this is the switch for the power vent if it looses draft or pressurizes the box. That is installed in the fire box as per LL. directions.

If that is wrong it can be moved.
from the archives:
***Shuts Down Your Stove If Flue Gases Backup***

This link will take you to Fields WMO-1 pdf file>>> Instruction_Manuals_WMO-1

Post Reply

Return to “Stoker Coal Furnaces & Stoves Using Anthracite (Hot Air)”