Setting up Bulk and Bagging Facility
Hi I am a new member who lives in the State of CT and I am in the process of setting up a bulk and bagged facilityhere. Iam looking for input and suggestions as best to by and so on. All input will be great Duckman (DON)
- coalmeister
- Member
- Posts: 668
- Joined: Fri. May. 23, 2008 3:13 pm
- Location: Between Rochester & Buffalo NY
Biggest drawback at least in NY, is you must have certified scales big enough to drive on.
- Richard S.
- Mayor
- Posts: 15255
- Joined: Fri. Oct. 01, 2004 8:35 pm
- Location: NEPA
- Stoker Coal Boiler: Van Wert VA1200
- Coal Size/Type: Buckwheat/Anthracite
Note that I don't allow solicitations for customers, I'll leave this open for discussion purposes.
Edit: for a source you might want to check the suppliers thread or even the phone book.:
Need Coal? Location and Dealer Inquiries Go Here.
-or-
Coal Quality From Various Sources
Edit: for a source you might want to check the suppliers thread or even the phone book.:
Need Coal? Location and Dealer Inquiries Go Here.
-or-
Coal Quality From Various Sources
- coaledsweat
- Site Moderator
- Posts: 13768
- Joined: Fri. Oct. 27, 2006 2:05 pm
- Location: Guilford, Connecticut
- Stoker Coal Boiler: Axeman Anderson 260M
- Coal Size/Type: Pea
Hi Duckman, where are you located as I am in CT? I believe the scale requirment is the same in CT but I know of a vendor in Meriden who does not have a scale. Not sure if he is permitted as a fuel dealer. For sources, your best contact is member coalberner, he is the Forum's Oracle on coal supplies.
I am trying a supplier in PA-KY who can supply me with trailer loads of both rice and nut bagged or unbagged for good, fair price . I GOT TO WORRY ABOUT SHIPPING AND SUCH. I have certified scales trucks and means to deliver either bagged or unbagged Thanx
- Duengeon master
- Member
- Posts: 1958
- Joined: Sun. May. 06, 2007 7:32 am
- Location: Penndel, Pa.
- Hand Fed Coal Stove: Harmon Mark III
- Coal Size/Type: Anthracite pea and nut mix. Bituminous lump
Hi Don. Good luck with your endever!
- Ed.A
- Member
- Posts: 1635
- Joined: Thu. Aug. 30, 2007 7:27 pm
- Location: Canterbury Ct.
- Hot Air Coal Stoker Stove: Alaska Channing III/ '94 Stoker II
- Coal Size/Type: Rice
Well that should please Coaledsweat, last I knew Guilford was along the Shoreline....depending on where along the shoreline....me not so much.duckman wrote:Along the shoreline but would handle the entire state and...
- EasyRay
- Member
- Posts: 468
- Joined: Thu. Nov. 16, 2006 8:44 pm
- Location: Central Connecticut
- Hand Fed Coal Stove: Harman TLC 2000
- Coal Size/Type: Pea,Nut or Stove
Because I'm only five minutes away from BT it wouldn't help me at all. I'm sure there are a bunch of people in your area who would be happy. Good Luck.
-
- Member
- Posts: 320
- Joined: Wed. Aug. 06, 2008 1:18 pm
- Location: Connecticut Shoreline
- Hand Fed Coal Stove: Hitzer 503 insert
- Coal Size/Type: Nut --- bagged
Donduckman wrote:Along the shoreline but would handle the entire state and...
I also live on the shoreline (Clinton) and I'm very interested in your endevor as
some of my friends would be too. Please Keep us all informed of your progress
Rick