Trying to Determine Harman Fireplace Insert Model

Post Reply
 
mrdavis
New Member
Posts: 3
Joined: Fri. Oct. 14, 2022 3:19 pm

Post by mrdavis » Fri. Oct. 14, 2022 3:44 pm

We bought an older used Harman fireplace insert this summer and it did not have any plates on it to determine the model number. Can anyone identify what it is so we can find out what the best type of coal is to burn in it.

It measures 24Hx28W

Attachments

DEEB63E8-FD15-4DF8-97BE-CCD115E01ADC.jpeg

Fireplace insert.


 
User avatar
D-frost
Member
Posts: 1182
Joined: Sun. Dec. 08, 2013 7:10 am
Location: Southern New Hampshire
Hand Fed Coal Stove: Harman MK ll
Hand Fed Coal Furnace: Yukon Eagle I (multi-fuel oil, wood/coal)
Baseburners & Antiques: Herald 'fireside oak'
Coal Size/Type: nut/stove-Blaschak/Lehigh

Post by D-frost » Fri. Oct. 14, 2022 6:03 pm

Mr Davis
Welcome to the forum. At the top right of page is a 'search' block.....type Harman insert......lot's of info in those threads. I have a Harman Mark II, stand-a-lone that burns anthracite 'nut' & 'stove' size real well.
Cheers

 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Fri. Oct. 14, 2022 7:12 pm

Take a picture of of the grates/inside.


 
mrdavis
New Member
Posts: 3
Joined: Fri. Oct. 14, 2022 3:19 pm

Post by mrdavis » Sat. Oct. 15, 2022 12:12 pm

Attaching picture of grates.

Attachments

2F26B6F7-D066-4965-BF99-2F0774D69C6C.jpeg

Harman grates

.JPEG | 1.1MB | 2F26B6F7-D066-4965-BF99-2F0774D69C6C.jpeg

 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Sat. Oct. 15, 2022 12:45 pm

3 grates. So equal to mark III in capacity. Same grates as our Mark 2's, just an extra. Ours are recommended to used pea, nut or stove. Should throw some massive heat.

 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Sat. Oct. 15, 2022 12:46 pm

Is the picture of where it is now? Or where it came from?


 
mrdavis
New Member
Posts: 3
Joined: Fri. Oct. 14, 2022 3:19 pm

Post by mrdavis » Sat. Oct. 15, 2022 5:53 pm

These are the pics of the grates when we bought it. We removed them to move the stove. It was one heavy bugger!

Thank you for the info on what type of coal to use.

 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Sat. Oct. 15, 2022 7:00 pm

No problem. There's lots of info here, just use the search. Any questions, just ask away.

Post Reply

Return to “Coal News & General Coal Discussions”