Interesting way to circulate air
-
- Member
- Posts: 1137
- Joined: Fri. Feb. 12, 2016 2:36 pm
- Hand Fed Coal Boiler: Harman SF360
- Hand Fed Coal Stove: T.O.M (Warm Morning converted to baseburner by Steve) Round Oak 1917 Door model O-3, Warm Morning 400, Warm Morning 524, Warm Morning 414,Florence No.77, Warm Morning 523-b
- Hand Fed Coal Furnace: Clayton 7.1/DS Machine basement stove/ Harman SF1500
- Baseburners & Antiques: Renown Parlor stove 87B
- Coal Size/Type: Bituminous/anthracite
- Other Heating: Harman Accentra, enviro omega, Vermont Ironworks Elm stove, Quadrafire Mt Vernon, Logwood stove, Sotz barrel stove,
-
- Member
- Posts: 1832
- Joined: Tue. Mar. 12, 2013 3:00 pm
- Location: NW ohio
- Hand Fed Coal Stove: ds circultor1500 \chubby coal stove
- Coal Size/Type: nut/ pea ant.some bit.
- Other Heating: kerosene\cold nat. gas
ok guess iwill stat\rt here i have the ds 1500 i want to put it in my basement ,but my ceiling is only about 6,6 to the floor joist and im concerned about to much heat rising to them at the joist ,would a false metal ceiling above it be safe or still to much direct heat to be safe ?cold air returns and register already thought of but abain ds i think recomends about 54 inches from ceiling hmmmm .any thoughts or ideas guys if the ds is to big what to look for will be next in line thanx guys in advance !!!!!!!!!!!
-
- Member
- Posts: 3941
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
Get someone to move this to its own thread. I'm sure people would want to have this information searchable.
-
- Member
- Posts: 3941
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
What I'd the height of the stove?
-
- Member
- Posts: 1832
- Joined: Tue. Mar. 12, 2013 3:00 pm
- Location: NW ohio
- Hand Fed Coal Stove: ds circultor1500 \chubby coal stove
- Coal Size/Type: nut/ pea ant.some bit.
- Other Heating: kerosene\cold nat. gas
36 and 3\4 is the height and yes it should be moved to its own thread damd if i know how !!
-
- Member
- Posts: 3941
- Joined: Fri. Aug. 16, 2019 3:02 pm
- Location: Oneida, N.Y.
- Hand Fed Coal Stove: Harmon Mark II
- Hand Fed Coal Furnace: Looking
- Baseburners & Antiques: Looking
- Coal Size/Type: Nut
- Other Heating: newmac wood/coal combo furnace
I guess you have to find ds specs. Seems like 3 ft of clearance would be ok.