Who makes the ash pans?

Post Reply
 
BobG
New Member
Posts: 2
Joined: Thu. Oct. 08, 2020 9:13 pm

Post by BobG » Thu. Oct. 08, 2020 9:18 pm

I am searching for the elusive "Freddy". He is supposed to make the finest ash pans available. Can someone put me in contact with this man? The pin holes in my Harman Magnum ash pan are becoming nail holes!

 
User avatar
Lightning
Site Moderator
Posts: 14659
Joined: Wed. Nov. 16, 2011 9:51 am
Location: Olean, NY
Stoker Coal Boiler: Modified AA 130
Coal Size/Type: Pea Size - Anthracite

Post by Lightning » Sat. Oct. 10, 2020 4:38 pm



 
BobG
New Member
Posts: 2
Joined: Thu. Oct. 08, 2020 9:13 pm

Post by BobG » Mon. Oct. 12, 2020 7:21 pm

Thank you Lightning... I hope your tip pans out... no pun intended.

 
User avatar
Lightning
Site Moderator
Posts: 14659
Joined: Wed. Nov. 16, 2011 9:51 am
Location: Olean, NY
Stoker Coal Boiler: Modified AA 130
Coal Size/Type: Pea Size - Anthracite

Post by Lightning » Mon. Oct. 12, 2020 8:34 pm

BobG wrote:
Mon. Oct. 12, 2020 7:21 pm
Thank you Lightning... I hope your tip pans out... no pun intended.
No problem!
Good luck :)

Post Reply

Return to “Coal News & General Coal Discussions”