New Guy Wanting to Switch to Coal Questions

Jammin416
New Member
Posts: 18
Joined: Thu. Jan. 31, 2013 2:02 pm
Stove/Furnace Make: Shenandoah
Stove/Furnace Model: FP-1 fire place insert

Post Thu. Jan. 31, 2013 2:47 pm

Hi:

New guy here ( Joe), I have and old Shenandoah fp-1 wood/coal insert that was in the house when I purchased it from my grand pop. It's old but excellent condition and works great, My house was built in the 50's so there isn't much for insulation in the walls. Right now I burn 5 to 6 cords of wood a winter depending on the weather, This is my main source of heat as I refuse to pay 3.89 a gallon for heating oil. I want to switch from wood to coal as my back doesn't agree with all the splitting and stacking of wood. What kind of coal should I use and how many tons roughly would equal what I burn in wood?. I called a place close to me called Lutz's coal yard and they want $255 for a ton of coal with $25 delivery fee. I figure I sell my splitter that will buy some of the coal for next year, I was peaking around the site lots of great info here.

Thx. Joe


User avatar
Dennis
Member
Posts: 1066
Joined: Sun. Oct. 30, 2011 5:44 pm
Hand Fed Coal Boiler: AHS/WOC55-multi-fuel/wood,oil,coal
Coal Size/Type: Anthracite/stove size
Location: Pottstown,Pa

Post Thu. Jan. 31, 2013 3:08 pm

Hi Joe and welcome.I was at Lutz's last week,they have Blashak coal and is a fair price for good coal.Do you know if your grandpop ever burned coal.Post a pic. of your insert along with close up of the grate system,Save the spiltter it's payed for and you might need to burn wood on the cooler fall or spring evenings to take the chill off.I havn't bought oil in 4 yrs,who needs it with coal.You will need either nut or stove size for your insert,so post the pics that will help to determine the coal size also,and Lutz's has both sizes in bulk or bags.

User avatar
Rick 386
Member
Posts: 2474
Joined: Mon. Jan. 28, 2008 4:26 pm
Stoker Coal Boiler: AA 260 heating both sides of twin farmhouse
Hot Air Coal Stoker Stove: LL Hyfire II w/ coaltrol in garage
Coal Size/Type: Pea in AA 260, Rice in LL Hyfire II
Other Heating: Gas fired infared at work
Location: Royersford, Pa
Contact:

Post Thu. Jan. 31, 2013 3:31 pm

Howdy Joe,

Welcome to the greatest coal forum on the 'net.

We must be relatively close to each other. I only live 4 miles from Lutz.

Several questions need to be asked. Do you wish to replace the wood burner in the fireplace with the coal unit ? Do you have fairly reliable electric service ?? Would you like a stoker or hand fed ??

What is your current heating system ?? If it is an oil burner with hot water radiators in each room, would you like to heat that water with coal and and also possibly your domestic hot water ??

Tell us a little about the layout of the house and then we can offer suggestions.

Rick

Jammin416
New Member
Posts: 18
Joined: Thu. Jan. 31, 2013 2:02 pm
Stove/Furnace Make: Shenandoah
Stove/Furnace Model: FP-1 fire place insert

Post Thu. Jan. 31, 2013 4:37 pm

Thx. Guys, I don't have any pictures of the grate. It's a shakers grate and the holes measure 2"x 3-3/4" , I'm pretty sure my Grand pop only burned coal back in the day. I have a good handle on burning wood and can get 7 hours burn on a load of wood on a good day, The insert is just put in the fireplace with no liner pipe but they did do the inside of the fire place with steel plate around the whole inside and I have never had a problem since I have been burning it and get an excellent draft. Every spring when I clean the flue it barely has any creosote build up. I assume you do not get creosote with coal? The main house heat is oil but I do not use it anymore, I only run it once in a while in the winter just to run it some. The house is 1 story with a finished attic , But I do not use the attic for anything but storage. So basically I heat 1 floor, the house is about 1750 sq. feet.

User avatar
fastcat
Member
Posts: 443
Joined: Thu. Nov. 12, 2009 11:50 pm
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: Blaschak Nut/Stove Mix
Location: CNY (McGraw)

Post Thu. Jan. 31, 2013 7:34 pm

Hi Joe and welcome. Those grate holes seam to be very large for coal, you didn't happen to come across another set of grates laying someplace? The spacing I beleive needs to be much finer for coal, Nut coal would fall right through. As for the amount of coal vs wood, 1 full cord of wood (4'x4'x8') = 1 ton of coal. Is shanendoa still in business? If so check with them to see if there are differant grates for coal or maybe someone here will chime in that knows about your stove.

Jammin416
New Member
Posts: 18
Joined: Thu. Jan. 31, 2013 2:02 pm
Stove/Furnace Make: Shenandoah
Stove/Furnace Model: FP-1 fire place insert

Post Thu. Jan. 31, 2013 8:39 pm

I might be measuring a hair bigger. Here's what the top and bottom grates look like.

**Broken Image Link(s) Removed**

**Broken Image Link(s) Removed**

User avatar
coalkirk
Member
Posts: 4716
Joined: Wed. May. 17, 2006 8:12 pm
Stoker Coal Boiler: 1981 EFM DF520
Hand Fed Coal Stove: Jotul 507 on standby
Coal Size/Type: Lehigh anthracite/rice coal
Location: Forest Hill MD

Post Thu. Jan. 31, 2013 10:14 pm

Jammin416 wrote:Hi:

New guy here ( Joe), I have and old Shenandoah fp-1 wood/coal insert that was in the house when I purchased it from my grand pop. It's old but excellent condition and works great, My house was built in the 50's so there isn't much for insulation in the walls. Right now I burn 5 to 6 cords of wood a winter depending on the weather, This is my main source of heat as I refuse to pay 3.89 a gallon for heating oil. I want to switch from wood to coal as my back doesn't agree with all the splitting and stacking of wood. What kind of coal should I use and how many tons roughly would equal what I burn in wood?. I called a place close to me called Lutz's coal yard and they want $255 for a ton of coal with $25 delivery fee. I figure I sell my splitter that will buy some of the coal for next year, I was peaking around the site lots of great info here.

Thx. Joe
It sounds like you are in coal country. You can't pay $255 per ton plus $25 delevery charge! Thats 280 per ton! I'm in Maryland but go to PA for coal and paid 170 per ton. If you don't have a pickup, borrow one. 8-)

Jammin416
New Member
Posts: 18
Joined: Thu. Jan. 31, 2013 2:02 pm
Stove/Furnace Make: Shenandoah
Stove/Furnace Model: FP-1 fire place insert

Post Thu. Jan. 31, 2013 10:18 pm

coalkirk wrote:
Jammin416 wrote:Hi:

New guy here ( Joe), I have and old Shenandoah fp-1 wood/coal insert that was in the house when I purchased it from my grand pop. It's old but excellent condition and works great, My house was built in the 50's so there isn't much for insulation in the walls. Right now I burn 5 to 6 cords of wood a winter depending on the weather, This is my main source of heat as I refuse to pay 3.89 a gallon for heating oil. I want to switch from wood to coal as my back doesn't agree with all the splitting and stacking of wood. What kind of coal should I use and how many tons roughly would equal what I burn in wood?. I called a place close to me called Lutz's coal yard and they want $255 for a ton of coal with $25 delivery fee. I figure I sell my splitter that will buy some of the coal for next year, I was peaking around the site lots of great info here.

Thx. Joe
It sounds like you are in coal country. You can't pay $255 per ton plus $25 delevery charge! Thats 280 per ton! I'm in Maryland but go to PA for coal and paid 170 per ton. If you don't have a pickup, borrow one. 8-)
I have a pickup and a trailer, Where did you get your coal and what kind?

Joe


User avatar
coalkirk
Member
Posts: 4716
Joined: Wed. May. 17, 2006 8:12 pm
Stoker Coal Boiler: 1981 EFM DF520
Hand Fed Coal Stove: Jotul 507 on standby
Coal Size/Type: Lehigh anthracite/rice coal
Location: Forest Hill MD

Post Thu. Jan. 31, 2013 10:24 pm

OK, now we're talking! I've been getting it from Superior and Summit. This year I got it at UAE. 170 is the most I ever paid. Look at the coal quality section of the forum. There is lots of info on various sources of coal.

Jammin416
New Member
Posts: 18
Joined: Thu. Jan. 31, 2013 2:02 pm
Stove/Furnace Make: Shenandoah
Stove/Furnace Model: FP-1 fire place insert

Post Fri. Feb. 01, 2013 2:24 pm

coalkirk wrote:OK, now we're talking! I've been getting it from Superior and Summit. This year I got it at UAE. 170 is the most I ever paid. Look at the coal quality section of the forum. There is lots of info on various sources of coal.
Thx. for the info. Just need to figure out what to burn.

User avatar
titleist1
Member
Posts: 4405
Joined: Wed. Nov. 14, 2007 4:06 pm
Hot Air Coal Stoker Stove: Harman Mag Stoker (old style) one in basement, one in workshop
Hand Fed Coal Stove: Harman Mark III on standby for long power outages
Coal Size/Type: Rice/Anthracite; Nut/Anthracite
Location: Cecil County, MD

Post Fri. Feb. 01, 2013 2:57 pm

I can't picture how those grates shake, but the holes look too big for nut coal. No creosote when burning anthracite coal.

User avatar
Dennis
Member
Posts: 1066
Joined: Sun. Oct. 30, 2011 5:44 pm
Hand Fed Coal Boiler: AHS/WOC55-multi-fuel/wood,oil,coal
Coal Size/Type: Anthracite/stove size
Location: Pottstown,Pa

Post Fri. Feb. 01, 2013 4:22 pm

Jammin416 wrote:
coalkirk wrote:OK, now we're talking! I've been getting it from Superior and Summit. This year I got it at UAE. 170 is the most I ever paid. Look at the coal quality section of the forum. There is lots of info on various sources of coal.
Thx. for the info. Just need to figure out what to burn.
Go to Lutz's and pick up 300 lb of nut and 300 lb of stove bagged,that's what I done last friday it cost $87.00. They sell in bulk at half ton minium witch is cheaper. Start with a small load to test what your stove likes the best,I've been mixing the sizes and like the 50%/50% mix.
Hers a thread to read on starting a fire How to Light a Hand Fired Coal Stove
Pea Coal Vs. Chestnut Coal Vs. Stove Coal

Jammin416
New Member
Posts: 18
Joined: Thu. Jan. 31, 2013 2:02 pm
Stove/Furnace Make: Shenandoah
Stove/Furnace Model: FP-1 fire place insert

Post Sat. Feb. 02, 2013 9:19 am

Thx. Dennis, Going out there next weekend to get 2 bags and see how it works out. From reading so far it looks like the stove coal might be best for me. I will report back after I test it out, Once I determine what works I will be building a coal Bin for next winter.

User avatar
Dennis
Member
Posts: 1066
Joined: Sun. Oct. 30, 2011 5:44 pm
Hand Fed Coal Boiler: AHS/WOC55-multi-fuel/wood,oil,coal
Coal Size/Type: Anthracite/stove size
Location: Pottstown,Pa

Post Sat. Feb. 02, 2013 10:04 am

Jammin416 wrote:From reading so far it looks like the stove coal might be best for me.
Get both sizes for comparsion. 600 lbs. lasted me 10 days.The only reason i'm triyng stove size is the nut falls thru my grates and,but burns fine and hot.I tried 100% stove,it burned good but took longer to get ignited and was a real bitch for shaking down and bridging and burned hot also.

Jammin416
New Member
Posts: 18
Joined: Thu. Jan. 31, 2013 2:02 pm
Stove/Furnace Make: Shenandoah
Stove/Furnace Model: FP-1 fire place insert

Post Sat. Feb. 02, 2013 10:17 am

Dennis wrote:
Jammin416 wrote:From reading so far it looks like the stove coal might be best for me.
Get both sizes for comparsion. 600 lbs. lasted me 10 days.The only reason i'm triyng stove size is the nut falls thru my grates and,but burns fine and hot.I tried 100% stove,it burned good but took longer to get ignited and was a real bitch for shaking down and bridging and burned hot also.
Would you happen to have pictures of the 2 coals for size comparison? I was looking for pictures and didn't see any. Just curious.


Post Reply

Return to “Coal News & General Coal Discussions”