cu Foot for One Ton of Rice Coal

Post Reply
mjb
New Member
Posts: 17
Joined: Thu. Jan. 19, 2006 9:51 am
Location: Eastern Long Island

Post Tue. Dec. 04, 2007 3:37 pm

I've read that a ton of pea coal is approx 4' x 4' x 8'. If this is correct then what are the numbers for a ton of rice coal? The last two years after a delivery, I get a print out of what I ordered. I use to get a scale slip showing the weight of truck and coal purchased but not any more. Is this allowable?


User avatar
Richard S.
Mayor
Posts: 12743
Joined: Fri. Oct. 01, 2004 8:35 pm
Stoker Coal Boiler: Van Wert VA1200
Coal Size/Type: Buckwheat/Anthracite
Location: NEPA

Post Tue. Dec. 04, 2007 4:03 pm

4x4x8 will fit about 3 tons usually mounded up a little. 1 ton of coal is approximately 40 cubic feet per ton, might be a little less, might be a little more.... The rice will take up more space than the pea.

Anything sold by weight in Pennsylvania, (coal, rock etc.) must be accompanied by a certified weightmasters certificate with the following things list: Date and time, truck license, scale location, tare, net, gross and weightmasters signature. If you're splitting loads you need a weightslip for each seperate load. They are also required to keep a copy on site at the scale for X amount time. I do not know what the laws are in N.Y.

Post Reply

Return to “Coal News & General Coal Discussions”