Electricity Generation From Stove?

 
BurninCoalInRI
Member
Posts: 65
Joined: Mon. Dec. 04, 2006 4:01 am

Post by BurninCoalInRI » Sat. Dec. 09, 2006 11:09 am

this magazine is a great resource...

http://www.homepower.com/

 
User avatar
japar
Member
Posts: 165
Joined: Tue. Oct. 16, 2007 8:52 pm
Location: Seekonk MA
Hand Fed Coal Stove: Hearthmate

Post by japar » Mon. Sep. 01, 2008 7:51 pm

Now that all our electric bills have gone up like everything else has anyone come up with any new ideas on an old post . How does the Ecofan work with the fan out in front and not on top ? Maybe somthing can be designed to run a small 12v generator like ebay# 250288662750 that can be used to charge a battery bank. You may not be able to generate alot of amps but it would be able to run 24/7.

 
franco b
Site Moderator
Posts: 11417
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Tue. Dec. 22, 2009 2:08 pm

Stirling engine. the black cylinder is the furnace.

Attachments

S IMG_1365b.jpg
.JPG | 214.2KB | S IMG_1365b.jpg

 
franco b
Site Moderator
Posts: 11417
Joined: Wed. Nov. 05, 2008 5:11 pm
Location: Kent CT
Hand Fed Coal Stove: V ermont Castings 2310, Franco Belge 262
Baseburners & Antiques: Glenwood Modern Oak 114
Coal Size/Type: nut and pea

Post by franco b » Tue. Dec. 22, 2009 3:03 pm

Steam engines. Steam motorcycle. Stanley Steamer boiler.

Attachments

Img_0706b.jpg
.JPG | 211.7KB | Img_0706b.jpg
610 IMG_1258b.jpg
.JPG | 190KB | 610 IMG_1258b.jpg
P9280793b.jpg
.JPG | 155.5KB | P9280793b.jpg


 
JJLL
Member
Posts: 95
Joined: Mon. Oct. 15, 2007 12:16 pm
Hand Fed Coal Boiler: Harman SF-360 Boiler

Post by JJLL » Wed. Dec. 23, 2009 10:30 am

I'm a bit busy at the moment so I've only skimmed through this thread....

Look at some of the videos on this page - http://www.greensteamengine.com/

I've often thought of using something along these lines to power a few pumps/motors.

 
User avatar
SMITTY
Member
Posts: 12526
Joined: Sun. Dec. 11, 2005 12:43 pm
Location: West-Central Mass
Stoker Coal Boiler: EFM 520 Highboy
Coal Size/Type: Rice / Blaschak anthracite
Other Heating: Oil fired Burnham boiler

Post by SMITTY » Wed. Dec. 23, 2009 11:06 am

Those are pretty neat!

Looks like alot of potential for broken parts though .... I couldn't see a setup like that lasting very long powering anything .... but you get what you pay for.

 
samhill
Member
Posts: 12236
Joined: Thu. Mar. 13, 2008 10:29 am
Location: Linesville, Pa.
Hot Air Coal Stoker Furnace: keystoker 160
Hand Fed Coal Stove: hitzer 75 in garage

Post by samhill » Wed. Dec. 23, 2009 11:55 am

I worked for a guy for quite a few years that owned what was supposed to be the largest steam engine collection in the world. I don`t even remember how many stanleys he had ( at least 18) but mostly he had the tractors that were used for farming & running log mills & such. Everything breaks down but I can`t remember one of his down & they were used a good bit, I took people for rides in a little stanley bus for a week straight probably 20 or better rires a day without a problem.

 
User avatar
SMITTY
Member
Posts: 12526
Joined: Sun. Dec. 11, 2005 12:43 pm
Location: West-Central Mass
Stoker Coal Boiler: EFM 520 Highboy
Coal Size/Type: Rice / Blaschak anthracite
Other Heating: Oil fired Burnham boiler

Post by SMITTY » Wed. Dec. 23, 2009 1:46 pm

Old time steam engines are as tough as nails ...... I was referring to the green steam link .... lots of moving parts violently changing direction many times per second, .... but unlike an internal combustion engine, which reciprocates up & down, this is going in several different directions! :shock:

Watch the video of it in action ... you'll see what I mean. I suppose it could be built using all titanium parts though ...


 
samhill
Member
Posts: 12236
Joined: Thu. Mar. 13, 2008 10:29 am
Location: Linesville, Pa.
Hot Air Coal Stoker Furnace: keystoker 160
Hand Fed Coal Stove: hitzer 75 in garage

Post by samhill » Wed. Dec. 23, 2009 4:42 pm

The lack of lubrication & that flex tube on the smaller engines would be the most likely trouble spots IMO. But then again what do I know, I`m kinda fond of the old peoven things.

 
User avatar
coaledsweat
Site Moderator
Posts: 13767
Joined: Fri. Oct. 27, 2006 2:05 pm
Location: Guilford, Connecticut
Stoker Coal Boiler: Axeman Anderson 260M
Coal Size/Type: Pea

Post by coaledsweat » Fri. Dec. 25, 2009 5:08 pm

Unfortunately, to make any serious power you need high pressure steam. This is not something you are going to want in your home.

 
User avatar
gaw
Member
Posts: 4461
Joined: Fri. Jan. 26, 2007 2:51 am
Location: Parts Unknown
Stoker Coal Boiler: Keystoker KA-6
Coal Size/Type: Rice from Schuylkill County

Post by gaw » Sat. Dec. 26, 2009 1:09 pm

Someone has been giving steam electricity for home use some thought. Check this site out.
http://www.backwoodshome.com/articles/goebel43.html

Here is an interesting piece of equipment. Not for a home owner but its not exactly huge either.
http://www.energent.net/documents/Microsteam_Brochure.pdf

I recall hearing that the cheapest electricity you can get is what comes to you from the electric company and the cheapest electricity you can make yourself would be from a small hydro turbine but who owns property with a stream capable? Wind is next then solar. I heard this a few years ago and solar has been getting cheaper and maybe so has everything else so I don’t know for sure what is the most economical today. I think I’ll just stick with PP&L for the time being.

 
User avatar
Wren
Member
Posts: 1220
Joined: Tue. Nov. 01, 2016 4:12 pm
Location: Canada
Hand Fed Coal Stove: Tiger 130, Glenwood 116, Glenwood 208 C
Coal Size/Type: Stove
Other Heating: Drolet woodstove, gas

Post by Wren » Fri. Mar. 03, 2017 4:03 pm

I know it's an old post. The Green Steam link will build one for you or sell the parts for a larger one. Did anyone here try it? An 82 year old I know wants to make one and is sending for the parts. Says it could be run with pellets too. He was in the navy(so sometimes I believe him?) and says it wouldn't use that much coal or make that much noise. He says it's to run a house, not a factory!!! But he's worked with diesel and just tunes noise out. I'm interested.
Many of you are already heating water with boiler systems. Electricity isn't really much more of a leap.

Post Reply

Return to “Coal News & General Coal Discussions”