TLC 2000 Bottom Steal Bar

Post Reply
 
tricky44
New Member
Posts: 3
Joined: Fri. Jan. 09, 2009 7:21 pm

Post by tricky44 » Fri. Jan. 09, 2009 7:24 pm

Any one have this problem? my bottom steal bars is warping. And can I order new ones? :mad: :mad:

 
User avatar
EasyRay
Member
Posts: 468
Joined: Thu. Nov. 16, 2006 8:44 pm
Location: Central Connecticut
Hand Fed Coal Stove: Harman TLC 2000
Coal Size/Type: Pea,Nut or Stove

Post by EasyRay » Fri. Jan. 09, 2009 7:43 pm

This is my third season with this stove and have had no problems with steel bars as of yet. Or anything else.
Get a replacement from your dealer.

 
tricky44
New Member
Posts: 3
Joined: Fri. Jan. 09, 2009 7:21 pm

Post by tricky44 » Sat. Jan. 10, 2009 3:59 am

thanks for info


 
zeeklu
Member
Posts: 90
Joined: Sun. Jun. 08, 2008 5:26 am

Post by zeeklu » Sat. Jan. 10, 2009 5:23 am

Mine are all warped.I let the stove burn down and grab all 3 at once and pull them out.Then I hammer them straight and put them back in.I think I will replace them after the heating season because they don't stay straight for long.I would just go to Lowes and get a piece of flat steel to replace them. Chris

 
User avatar
Devil505
Member
Posts: 7102
Joined: Tue. Jul. 03, 2007 10:44 pm
Location: SE Massachusetts

Post by Devil505 » Sat. Jan. 10, 2009 8:15 am

I have replaced one for warping in 4 years. Like said above, just bend them back into shape
Sure you can order them. Just call you Harman dealer. He probably stocks them.

 
tricky44
New Member
Posts: 3
Joined: Fri. Jan. 09, 2009 7:21 pm

Post by tricky44 » Sat. Jan. 10, 2009 11:14 pm

Thanks you guys are great :D

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”