PYREX for Front Glass?

Post Reply
 
MidnightMadman
Member
Posts: 260
Joined: Mon. Nov. 17, 2008 8:28 pm
Location: Hudson Valley, NY

Post by MidnightMadman » Sun. Nov. 30, 2008 11:52 am

The stove I bought has something that feels like plexi glass in place of where the glass should go on the door.
The guy I bought it from said it was pyrex. But when I tap on it it feels and sounds like plexi...
Anyone know what it is?

 
SAU
Member
Posts: 216
Joined: Sat. Sep. 06, 2008 12:47 pm
Location: Powder River Basin WY

Post by SAU » Sun. Nov. 30, 2008 12:49 pm

If you think it is Plexiglas you better put a MAPP torch to it and find out for sure before you light the stove up.

 
MidnightMadman
Member
Posts: 260
Joined: Mon. Nov. 17, 2008 8:28 pm
Location: Hudson Valley, NY

Post by MidnightMadman » Sun. Nov. 30, 2008 1:03 pm

Its what he had on there. It cant be plexi. but it feels like it.

 
xackley
Member
Posts: 252
Joined: Sun. Oct. 07, 2007 10:57 am
Location: Finger Lakes, NY

Post by xackley » Sun. Nov. 30, 2008 1:04 pm

Do a search on Robax. It's not really "glass" but it is definitely not plastic.


 
MidnightMadman
Member
Posts: 260
Joined: Mon. Nov. 17, 2008 8:28 pm
Location: Hudson Valley, NY

Post by MidnightMadman » Sun. Nov. 30, 2008 1:10 pm

That must be what it is. It has a strange crazing look when looking from an angle.

 
hyway61
Member
Posts: 51
Joined: Sun. Oct. 12, 2008 2:48 pm

Post by hyway61 » Sun. Nov. 30, 2008 1:26 pm

Is it the old fashioned mica window..?

hyway61

 
User avatar
Ashcat
Member
Posts: 419
Joined: Mon. Aug. 18, 2008 10:29 pm
Location: West Chester PA
Hand Fed Coal Stove: Hitzer 983
Coal Size/Type: Nut/Blaschak

Post by Ashcat » Sun. Nov. 30, 2008 1:30 pm

Here's a pic of Robax glass I liked--torch on one side, cold water poured on the other side. No breakage. It's good to ~1400* F
**Broken Link(s) Removed**

Attachments

Robax.jpg
.JPG | 16.3KB | Robax.jpg

 
User avatar
UpStateMike
Member
Posts: 103
Joined: Mon. Nov. 03, 2008 1:58 pm
Location: South New Berlin, NY

Post by UpStateMike » Tue. Dec. 02, 2008 12:23 pm

It would be cool to make a stove with large window areas of this stuff on the front, sides and back.


 
User avatar
LsFarm
Member
Posts: 7383
Joined: Sun. Nov. 20, 2005 8:02 pm
Location: Michigan
Stoker Coal Boiler: Axeman Anderson 260
Hand Fed Coal Boiler: Self-built 'Big Bertha' SS Boiler
Baseburners & Antiques: Keystone 11, Art Garland

Post by LsFarm » Tue. Dec. 02, 2008 2:08 pm

There are a couple of stoves made with a 'Bay Window' front,, like half a hexagon. Harman and Keystoker I think??

Greg L

 
User avatar
rockwood
Member
Posts: 1381
Joined: Sun. Sep. 21, 2008 7:37 pm
Location: Utah
Hot Air Coal Stoker Furnace: Stokermatic
Hand Fed Coal Stove: Rockwood Stoveworks Circulator
Baseburners & Antiques: Malleable/Monarch Range
Coal Size/Type: Lump and stoker + Blaschak-stove size

Post by rockwood » Tue. Dec. 02, 2008 3:11 pm

Mica is usually thin, like 1/16 of an inch or less and looks and is flexible like plastic and can be cut with scissors.

How thick is the "plastic"?

 
MidnightMadman
Member
Posts: 260
Joined: Mon. Nov. 17, 2008 8:28 pm
Location: Hudson Valley, NY

Post by MidnightMadman » Tue. Dec. 02, 2008 4:54 pm

Is about 1/4"

 
User avatar
rockwood
Member
Posts: 1381
Joined: Sun. Sep. 21, 2008 7:37 pm
Location: Utah
Hot Air Coal Stoker Furnace: Stokermatic
Hand Fed Coal Stove: Rockwood Stoveworks Circulator
Baseburners & Antiques: Malleable/Monarch Range
Coal Size/Type: Lump and stoker + Blaschak-stove size

Post by rockwood » Tue. Dec. 02, 2008 6:57 pm

I've never seen mica that thick but I guess it could be? Is it flexible?

I think you may have posted what stove you have in another thread but I can't remember. If you post it here maybe some one has the same one and can help with this.

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”