How hot should I burn

 
Srosen527
Member
Posts: 28
Joined: Thu. Jan. 27, 2022 11:52 am
Location: Boston, MA
Hand Fed Coal Stove: Hitzer 503 Insert
Coal Size/Type: Nut

Post by Srosen527 » Sat. Feb. 04, 2023 9:35 am

Hi! How hot should my Hitzer 503 insert burn when it’s -2 out?


 
Srosen527
Member
Posts: 28
Joined: Thu. Jan. 27, 2022 11:52 am
Location: Boston, MA
Hand Fed Coal Stove: Hitzer 503 Insert
Coal Size/Type: Nut

Post by Srosen527 » Sat. Feb. 04, 2023 9:35 am

Hi! How hot should my Hitzer 503 insert burn when it’s -2 out?

 
waytomany?s
Member
Posts: 3752
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Sat. Feb. 04, 2023 9:37 am

Depends. Do you care how warm the space is?

 
ColdHouse
Member
Posts: 2298
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Feb. 04, 2023 9:38 am

Do you have a stove thermometer? Keep it in the safe range, preferably in the middle of that safe range. Place the thermometer just above and to the right of the door on the front of the stove. Look at your stove. Is it glaring red? If it is it is too hot. So long as your stove is not overheating, burn it as hot as you want to achieve the desired temperature.

 
ColdHouse
Member
Posts: 2298
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Feb. 04, 2023 9:44 am

I didn't open my ash pan vents enough last evening to maintain the warm house. I woke up to 59 at the thermometer shown. What did I do? I serviced the stove and closed down the room. I have an elderly MIL in wheel chair and I wanted to first heat a space where she will be spending the day. I opened the ash pan vents all the way and let the fire get hot. As it was approaching the temperature range I wanted the stove at I closed the vents to half open. As the room warmed up I began opening doors to let the heat infiltrate the rest of the house.
IMG_9246.jpeg
.JPEG | 294.4KB | IMG_9246.jpeg
IMG_9247.jpeg
.JPEG | 261.2KB | IMG_9247.jpeg
IMG_9248.jpeg
.JPEG | 186.5KB | IMG_9248.jpeg

 
ColdHouse
Member
Posts: 2298
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Feb. 04, 2023 9:46 am

IMHO there are more ways to tell if a stove is burning too hot. Smell, feel, intuition? I know without even going into the kitchen and looking at a meal if what is cooking is done just by smell. Once you have over heated your stove you will know the signs without needing a thermometer to tell you.

 
Srosen527
Member
Posts: 28
Joined: Thu. Jan. 27, 2022 11:52 am
Location: Boston, MA
Hand Fed Coal Stove: Hitzer 503 Insert
Coal Size/Type: Nut

Post by Srosen527 » Sat. Feb. 04, 2023 9:51 am

I have it at 575 now, I usually keep it at 325 but when I got up this morning the house was pretty cold. I guess it’s just because it’s really
Cold out.


 
waytomany?s
Member
Posts: 3752
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Sat. Feb. 04, 2023 10:02 am

ColdHouse wrote:
Sat. Feb. 04, 2023 9:46 am
IMHO there are more ways to tell if a stove is burning too hot. Smell, feel, intuition? I know without even going into the kitchen and looking at a meal if what is cooking is done just by smell. Once you have over heated your stove you will know the signs without needing a thermometer to tell you.
Yes, experience. Experience you get from attention to detail. I would like to say common sense, but the older I get, it doesn't appear to be all that common.

 
ColdHouse
Member
Posts: 2298
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Feb. 04, 2023 10:09 am

Srosen527 wrote:
Sat. Feb. 04, 2023 9:51 am
I have it at 575 now, I usually keep it at 325 but when I got up this morning the house was pretty cold. I guess it’s just because it’s really
Cold out.
I would surmise it is because you didn't get ahead of the ball. In my situation yesterday evening the temperature at that thermometer was 69 and I went to bed with the ash pan vents only open 1/3. I woke up to 59*. Obviously I should have adjusted the stove to burn warmer because of the extreme cold temperature. I am a novice but think the thing about coal is slow and steady. So Don't expect fast change. If you create the environment for fast change that can be detrimental because once that fire gets roaring it will not just instantly simmer down. Slow and steady.

 
ColdHouse
Member
Posts: 2298
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Feb. 04, 2023 10:14 am

With all that said, I would think that if the temperatures tomorrow will be in low 40's no later than early hours of tomorrow morning, you would want to close down those ash pan vents or you will waste fuel and have a very warm house.

 
Srosen527
Member
Posts: 28
Joined: Thu. Jan. 27, 2022 11:52 am
Location: Boston, MA
Hand Fed Coal Stove: Hitzer 503 Insert
Coal Size/Type: Nut

Post by Srosen527 » Sat. Feb. 04, 2023 10:17 am

It was -10 this morning here in Boston. The house was 71. I must be used to it being 83 when it’s not so cold out 😂 Thank you for the advice!

 
ColdHouse
Member
Posts: 2298
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Feb. 04, 2023 10:28 am

Srosen527 wrote:
Sat. Feb. 04, 2023 10:17 am
It was -10 this morning here in Boston. The house was 71. I must be used to it being 83 when it’s not so cold out 😂 Thank you for the advice!
Who am I to tell you how warm to keep your home. You must like it warm. Kudo's to you. I would wonder though do you have an AC? Do you keep your house 83 in summer? I find it pretty crazy that people heat their homes to 80 in winter and cool them to 68 in summer. But hey if it is your dime, do as you please.

 
Srosen527
Member
Posts: 28
Joined: Thu. Jan. 27, 2022 11:52 am
Location: Boston, MA
Hand Fed Coal Stove: Hitzer 503 Insert
Coal Size/Type: Nut

Post by Srosen527 » Sat. Feb. 04, 2023 11:30 am

I have about 2000sqft to heat and the room that the stove is in, is 83 everywhere else is about 68. We have radiant heat throughout the house but we haven’t used it since we got the coal stove last year. It wasn’t really that efficient

 
ColdHouse
Member
Posts: 2298
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Feb. 04, 2023 11:39 am

Srosen527 wrote:
Sat. Feb. 04, 2023 11:30 am
I have about 2000sqft to heat and the room that the stove is in, is 83 everywhere else is about 68. We have radiant heat throughout the house but we haven’t used it since we got the coal stove last year. It wasn’t really that efficient
The house I live in has electric heat in each room. I am not sure if you would call it in the floors or the ceilings but each room has an electric thermostat. Obviously that is expensive. The previous owner installed an oil boiler and put hydro air in the house. There is an air handler in an attic crawl space that facilitates the first and second floor and another air handler in the finished basement. The oil boiler would also send me to the poor house if I let it run at current oil prices. Thus the reason I burn coal. I do however use the air handler to move my warm air and distribute it throughout the house.

 
Hoytman
Member
Posts: 6019
Joined: Wed. Jan. 18, 2017 11:30 pm
Location: swOH near a little town where the homes are mobile and the cars aren’t
Hand Fed Coal Stove: Hitzer 354
Coal Size/Type: nut coal
Other Heating: electric, wood, oil

Post by Hoytman » Sat. Feb. 04, 2023 12:04 pm

Imagine that…people needing some context to the original OP’s question. :lol:


Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”