Ash Disposal

 
User avatar
Sunny Boy
Member
Posts: 25557
Joined: Mon. Nov. 11, 2013 1:40 pm
Location: Central NY
Hand Fed Coal Boiler: Anthracite Industrial, domestic hot water heater
Baseburners & Antiques: Glenwood range 208, # 6 base heater, 2 Modern Oak 118.
Coal Size/Type: Nuts !
Other Heating: Oil &electric plenum furnace

Post by Sunny Boy » Fri. Dec. 31, 2021 6:06 pm

I only found out it was Deer by setting up a trail camera in the yard. Over the course of several nights a doe and her two yearlings eventually ate them right down to the ground.

At least, thanks to coal ash, I don't have a low spots in the lawn.

Paul


 
User avatar
Homesteader
Member
Posts: 299
Joined: Sat. Aug. 13, 2016 4:24 pm
Location: Goshen, CT.
Hand Fed Coal Stove: Harman Mark II
Coal Size/Type: Nut, Stove
Other Heating: H.B. Smith oil fired boiler

Post by Homesteader » Sat. Jan. 01, 2022 10:17 am

Jerrybro wrote:
Fri. Dec. 31, 2021 2:53 pm
Here in CT I call Scott at CT Pellet in Torrington, he’s good people.
I've bought coal from CT Pellet in Torrington also. They sell Blashak coal there but it's a bit pricy. Owner Scott Olsen is a good guy to deal with though. He owns property right across the street from me. Small world.

 
User avatar
joeq
Member
Posts: 5739
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Sat. Jan. 01, 2022 6:48 pm

Well, if we're still talkin CT, Burn Time Industries, (south of Hartford), has a warehouse about 5 miles from my house, (near Bradley AP) and I deal with them. They too sell Blaschak, but also supply LeHigh. I appreciate them supporting us, cause coal burners are few and far between compared to Pellets, and wood. They even can get me some stove size, but isn't as plentiful as the nut. I didn't use-ta advertise it, cause I was being stingy, and didn't wanna share, but keep it all for myself. But because I'm only buying a couple ton a year, the more business we can give them, the more they'll continue coal supplies. They've been charging a smiggen over $300 a ton for a few years now. If you buy big quantities, they work with the price.
And to keep with this thread, let me just say, my ash bag is full, and I need ta change it. :D

 
ColdHouse
Member
Posts: 2298
Joined: Thu. Nov. 08, 2012 12:06 pm
Location: Bristol, CT

Post by ColdHouse » Sat. Jan. 01, 2022 8:33 pm

Back to Basics in Terryville CT also has coal.

 
LouNY
Member
Posts: 301
Joined: Mon. Jan. 19, 2015 10:12 am
Location: Greenwich, NY
Hand Fed Coal Stove: Hitzer fireplace insert
Coal Size/Type: nut
Other Heating: oil

Post by LouNY » Thu. Jan. 06, 2022 2:44 pm

I had to dispose of a barrel of ashes today;
can was just about as full as it could be
barrel of ash.jpg
.JPG | 509.1KB | barrel of ash.jpg
bucket of ash.jpg
.JPG | 634.3KB | bucket of ash.jpg
then down to spread them in the driveway

 
User avatar
joeq
Member
Posts: 5739
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Thu. Jan. 06, 2022 4:46 pm

Nice to have a bucket handy. Is that a Kabota? how bout some pics of the driveway? Clinkers, and all.
Last edited by joeq on Thu. Jan. 06, 2022 9:58 pm, edited 1 time in total.

 
LouNY
Member
Posts: 301
Joined: Mon. Jan. 19, 2015 10:12 am
Location: Greenwich, NY
Hand Fed Coal Stove: Hitzer fireplace insert
Coal Size/Type: nut
Other Heating: oil

Post by LouNY » Thu. Jan. 06, 2022 9:47 pm

Thats a Branson 8050, 85 engine Hp and 65 pto Hp.

Here is from a couple of years ago when I used the sander to spread them.
Today I just sprinked them out of the bucket.
ash 1.jpg
.JPG | 816.1KB | ash 1.jpg
ash 3.jpg
.JPG | 384.3KB | ash 3.jpg
ash 5.jpg
.JPG | 491.4KB | ash 5.jpg
full dump 4.jpg
.JPG | 565.5KB | full dump 4.jpg
No idea why the 2nd and 3rd pics went sideways

This should take up to a video tour of the driveway from a few years ago,
https://www.youtube.com/watch?v=PSBqdk_hsCM


 
User avatar
joeq
Member
Posts: 5739
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Fri. Jan. 07, 2022 11:28 pm

Wow, just saw your drive-way video. Looks more like a public road. Now I know why you need the tractor. It handled that grade nicely. Like to see it, "climbing", next time. Do you dump your ashes on the road, or over the banking somewhere? Congrats on the new asphalt below.

 
LouNY
Member
Posts: 301
Joined: Mon. Jan. 19, 2015 10:12 am
Location: Greenwich, NY
Hand Fed Coal Stove: Hitzer fireplace insert
Coal Size/Type: nut
Other Heating: oil

Post by LouNY » Sat. Jan. 08, 2022 8:16 am

On the driveway, either using the sander or dribbling out of the bucket to spread them out.
About 20 yards for the 35 gallon can of ash.

 
User avatar
joeq
Member
Posts: 5739
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Sat. Jan. 22, 2022 12:21 pm

Just another quick up-date, aimed at those of us needing to toss our ashes in the trash can.
ash pail 001.JPG
.JPG | 503.6KB | ash pail 001.JPG
The plastic handle on the bucket, (naturally) broke off, so I drilled a hole to hang it on the shepherds hook. It hangs a bit crooked, but still works OK. Took my previous method from a 4 step procedure, to a 3 step. And the mouth of bucket holding the bag, makes the pouring from my hod, a hands free experience. As mentioned before, I can get 3 days of ashes in it, B4 needing to toss it in the trash, and replace with another bag. Wondering if all the 40lb bags have the same diameter. Think I still have an old Blaschac bag to try.

Of course, there could be an easier method of dumping , if I had the option. Having an ash chute right in frt of the stove, that went in the cellar, and would hold, (?) a bunch more, with less trips to the can. (Dreaming)

 
Shaun643
Member
Posts: 158
Joined: Sat. Nov. 03, 2018 11:44 am
Location: Peck Mi" in the thumb"
Hand Fed Coal Stove: Hitzer 50-93
Coal Size/Type: Nut and pea

Post by Shaun643 » Wed. Jan. 26, 2022 8:30 am

O pour my ash pan from the hitzer into a metal trash can on e that gets full I put it in my tractor bucket and go dump it out in my community burn pile. It works great for me. However I might save some for using on ice like you guys talk about.

 
User avatar
joeq
Member
Posts: 5739
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Tue. Feb. 15, 2022 6:47 pm

And to continue this conversation, I'll now add this. Maybe because it's been a cold lousy long winter, and a lot of crap has been happening around here, I think my patience level has dropped to a minus 1. My bucket funnel just took a flight off the deck across the back-yard, cause I'm sick and tired of trying to slide the bag up the bottom of the bucket. Maybe cause it's cold, the bags are shrinking, or maybe the plastic bucket has grown. I don't know. I just know it's gotten clumsy trying to slide the bag on the bottom of the bucket, and once I got it wrestled on, it wouldn't take much for it to slide down and off. Very frustrated right now. So I'll just go back to the old way....for now. :x

 
User avatar
freetown fred
Member
Posts: 30293
Joined: Thu. Dec. 31, 2009 12:33 pm
Location: Freetown,NY 13803
Hand Fed Coal Stove: HITZER 50-93
Coal Size/Type: BLASCHAK Nut

Post by freetown fred » Tue. Feb. 15, 2022 7:45 pm

LOL---calm down Joey!!!! :)

 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Tue. Feb. 15, 2022 8:26 pm

joeq wrote:
Tue. Feb. 15, 2022 6:47 pm
And to continue this conversation, I'll now add this. Maybe because it's been a cold lousy long winter, and a lot of crap has been happening around here, I think my patience level has dropped to a minus 1. My bucket funnel just took a flight off the deck across the back-yard, cause I'm sick and tired of trying to slide the bag up the bottom of the bucket. Maybe cause it's cold, the bags are shrinking, or maybe the plastic bucket has grown. I don't know. I just know it's gotten clumsy trying to slide the bag on the bottom of the bucket, and once I got it wrestled on, it wouldn't take much for it to slide down and off. Very frustrated right now. So I'll just go back to the old way....for now. :x
But just think of the alternative, 3.50 per gallon of oil, 2.95 propane, wood splinters.

 
User avatar
joeq
Member
Posts: 5739
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Tue. Feb. 15, 2022 10:15 pm

I don't need to worry about oil costs. My forced hot air burner has been on the blitz again, and my main source of heat has been my 111. So my oil tank is still 1/2 full.


Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”