harman Mark 1

Post Reply
 
gumptruck
Member
Posts: 72
Joined: Sat. Oct. 30, 2010 1:45 pm

Post by gumptruck » Sat. Feb. 13, 2021 9:42 pm

Friend of mine has a harman mark 1 stove. Having trouble with stove going out at night. Checked it out there are small holes in looks like the baffle. can u still get part or can I get plate of steel drill holes and screw on plate to baffle.

 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Sun. Feb. 14, 2021 7:43 pm

I wouldn't think that would cause it to go out. Transfer less heat, but not cause it to go out. Is the coal completely burnt in the front?

 
User avatar
oliver power
Member
Posts: 2970
Joined: Sun. Apr. 16, 2006 9:28 am
Location: Near Dansville, NY
Stoker Coal Boiler: KEYSTOKER Kaa-2
Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254

Post by oliver power » Sun. Feb. 14, 2021 8:35 pm

waytomany?s wrote:
Sun. Feb. 14, 2021 7:43 pm
I wouldn't think that would cause it to go out. Transfer less heat, but not cause it to go out. Is the coal completely burnt in the front?
I'll second that!

 
Slo2lrn
New Member
Posts: 8
Joined: Thu. Feb. 18, 2021 2:45 pm
Hand Fed Coal Stove: Harman/Legacy Mk II
Coal Size/Type: Nut
Other Heating: Joutl 108 wood stove

Post by Slo2lrn » Thu. Feb. 18, 2021 2:50 pm

Had a MkI for over 10 years. Good heat, but will burn the full load of coal without a barometric damper during windy days. Need to feed it more often during high draw conditions.
.


 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Thu. Feb. 18, 2021 5:53 pm

gumptruck wrote:
Sat. Feb. 13, 2021 9:42 pm
Friend of mine has a harman mark 1 stove. Having trouble with stove going out at night. Checked it out there are small holes in looks like the baffle. can u still get part or can I get plate of steel drill holes and screw on plate to baffle.
Ever sort it out?

 
gumptruck
Member
Posts: 72
Joined: Sat. Oct. 30, 2010 1:45 pm

Post by gumptruck » Tue. Feb. 23, 2021 7:14 pm

burning fine or better they cleaned it real good

 
waytomany?s
Member
Posts: 3747
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Tue. Feb. 23, 2021 8:34 pm

That'll definitely help.

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”