First a big "Thank You" to 'Holdencoal' for posting this in the 'Found on the Web' section!!!
Have a older 503 that I picked up in Watkins Glen, just a short 9 hr drive but great Wineries...
She needed a few parts replaced but I was holding off for some unknown reason...
The 503 that I have works great but does not have the improved damper and baffle of the newer 503 model...
Had just given her a good sanding and paint job...
All piped up and burning on Saturday...
Its been warm and oil was cheap...
I am wandering through Coalpail and I see...
The listing for a free 503...
Figured it would be a basket case but might make a good parts donor...
Held out hope as the picture had her with the damper I wanted and the location was promising...
Had to pack and run as rain was coming in quick...
But looked real good while I stripped her down for the ride home...
I'll take a better look in the morning...
The Newest 503 for Me!
-
- Member
- Posts: 6515
- Joined: Sun. Feb. 10, 2008 3:48 pm
- Location: Cape Cod, MA
- Stoker Coal Boiler: want AA130
- Hand Fed Coal Stove: DS Machine BS#4, Harman MKII, Hitzer 503,...
- Coal Size/Type: Pea/Nut/Stove
-
- Member
- Posts: 6077
- Joined: Wed. Jan. 18, 2017 11:30 pm
- Location: swOH near a little town where the homes are mobile and the cars aren’t
- Hand Fed Coal Stove: Hitzer 354
- Coal Size/Type: nut coal
- Other Heating: electric, wood, oil
Sweet!! Can’t wait to see her. New damper?? Show us some pictures.
-
- Member
- Posts: 673
- Joined: Sun. Nov. 17, 2019 2:17 pm
Happy to hear that it worked out!