Baffle Replacement - Harman Elite Insert

Post Reply
 
[email protected]
New Member
Posts: 2
Joined: Tue. Nov. 03, 2020 4:57 pm

Post by [email protected] » Mon. Nov. 09, 2020 8:08 pm

The baffle on my Harman Elite is warped and caused two hair-line cracks at the walls where it's welded in place. It did get over-fired once while I owned it for 6 years, but it was used when I bought it. It's a great stove and everything else is in really nice condition.

I'd prefer to repair it - if the repair is likely to last. Is it worth it? Any advice on what to replace the baffle with, where to cut it, etc. I would have to take it to a welder.

Thanks!


Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”