Lighten up!!
-
- Member
- Posts: 673
- Joined: Sun. Nov. 17, 2019 2:17 pm
What is the floor to flue height of the 30-59?
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
HUH??????????????????????????????????????????????
-
- Member
- Posts: 673
- Joined: Sun. Nov. 17, 2019 2:17 pm
My bad, I thought I read 30-95. I was hoping someone could help me with this measurement. I found a 30-59 in my area for sale. I just don’t want to hijack the thread to much.
Attachments
-
- Member
- Posts: 804
- Joined: Wed. Aug. 28, 2019 7:38 pm
- Location: Southwest P.A.
- Hand Fed Coal Stove: Hitzer 983/ Hitzer 55
- Coal Size/Type: Nut anthracite/pea
- Other Heating: Heat pump/forced air
34-1/4”my buddy measured his.Holdencoal wrote: ↑Sat. Nov. 14, 2020 5:53 pmMy bad, I thought I read 30-95. I was hoping someone could help me with this measurement. I found a 30-59 in my area for sale. I just don’t want to hijack the thread to much.
-
- Member
- Posts: 673
- Joined: Sun. Nov. 17, 2019 2:17 pm
Thank you for the help. Hizter says the stove height is 34” tall which should make the top of the flue pipe about 5” below that. I’m trying to confirm this.
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Soooo, ya asked & T answered. My 50-93 is 32 3/4" overall height not including top lid.
-
- Member
- Posts: 673
- Joined: Sun. Nov. 17, 2019 2:17 pm
Yes, but I know the total height of the unit. I am need assistance withthe height between the floor and the top of the flue pipe.
-
- Member
- Posts: 131
- Joined: Tue. Nov. 17, 2020 9:54 am
- Location: IL
- Hand Fed Coal Stove: Legacy TLC2000
- Coal Size/Type: Nut
- Other Heating: Forced air house , Dutchwest wood stove garage
Anyone burn wood in a hitzer 254