Hi all,
I sold my home and my 50-93 went with it. I just purchased another used one last night. One of my issues is that the door does not close very tight and the glass can be wiggled. It looks like the previous owner did something wrong with the gaskets. Can someone tell me how and what I need to fix this or if something is missing. Can someone post a picture of their door so I can get an idea what a good one looks like? Thanks in advanced!
50-93 Door
-
- Member
- Posts: 805
- Joined: Wed. Aug. 28, 2019 7:38 pm
- Location: Southwest P.A.
- Hand Fed Coal Stove: Hitzer 983/ Hitzer 55
- Coal Size/Type: Nut anthracite/pea
- Other Heating: Heat pump/forced air
Welcome to the forum... looks like a poor job replacing gaskets and not the correct ones and size. Contact Dean at Hitzer directly and he will get you what you need for installation.
- freetown fred
- Member
- Posts: 30299
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Your door gasket is trashed--R&R glass gasket--that gasket in my door has been there all season. If that don't help--the latch stub needs to be WHACKED back--it's an old stove soooo, old tricks won't hurt it--do this while ya got the door off---plenty of PB Blaster on screws holding glass in--you'll still maybe bust one--re-drill & tap.. use never seize & swap to lil hex bolts. Don't know if pix helps----3/4 gasket on door & standard flat gasket on glass. The door will be tight but she'll work herself in. Try just gasket before whacking that stud. Yeah, he did a TERRIBLE job on the glass gasket!!! LOL
Attachments
Last edited by freetown fred on Thu. Jul. 02, 2020 7:21 pm, edited 1 time in total.
- freetown fred
- Member
- Posts: 30299
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Keep us posted C.
- oliver power
- Member
- Posts: 2970
- Joined: Sun. Apr. 16, 2006 9:28 am
- Location: Near Dansville, NY
- Stoker Coal Boiler: KEYSTOKER Kaa-2
- Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254
Look at you Fred..... A brand new door gasket!!! Looks Good...freetown fred wrote: ↑Thu. Jul. 02, 2020 5:18 pmYour door gasket is trashed--R&R glass gasket--that gasket in my door has been there all season. If that don't help--the latch stub needs to be WHACKED back--it's an old stove soooo, old tricks won't hurt it--do this while ya got the door off---plenty of PB Blaster on screws holding glass in--you'll still maybe bust one--re-drill & tap.. use never seize & swap to lil hex bolts. Don't know if pix helps----3/4 gasket on door & standard flat gasket on glass. The door will be tight but she'll work herself in. Try just gasket before whacking that stud. Yeah, he did a TERRIBLE job on the glass gasket!!! LOL
- oliver power
- Member
- Posts: 2970
- Joined: Sun. Apr. 16, 2006 9:28 am
- Location: Near Dansville, NY
- Stoker Coal Boiler: KEYSTOKER Kaa-2
- Hand Fed Coal Stove: Hitzer 50-93 & 30-95, Vigilant (pre-2310), D.S. 1600 Circulator, Hitzer 254
He's probably trying to give the 50-93 over fire air. The Harman "Mark series" stoves have over fire air on that order.
-
- Member
- Posts: 673
- Joined: Sun. Nov. 17, 2019 2:17 pm
Here is a nice spare
https://www.facebook.com/marketplace/item/626338081498692/
https://www.facebook.com/marketplace/item/626338081498692/