Coal size

Post Reply
 
User avatar
Jjones6840
Member
Posts: 108
Joined: Fri. Oct. 12, 2018 9:04 pm
Location: Cecil county, MD
Hand Fed Coal Furnace: Hot blast 1357m
Coal Size/Type: Nut
Other Heating: Electric/heatpump

Post by Jjones6840 » Mon. Nov. 18, 2019 6:45 pm

Other than size, what is the diffrence between nut and stove sized coal. Will one burn longer than the other?

 
corey
Member
Posts: 1035
Joined: Fri. Nov. 14, 2014 11:14 am
Location: Southwest VA
Hand Fed Coal Stove: Buck Stove Hybrid
Coal Size/Type: Eastern KY bituminous

Post by corey » Mon. Nov. 18, 2019 6:50 pm

Nut size will pack tighter then stove size that makes the fire burn slower. The stove size allows more air flow making the fire hotter and not last as long.

 
User avatar
Jjones6840
Member
Posts: 108
Joined: Fri. Oct. 12, 2018 9:04 pm
Location: Cecil county, MD
Hand Fed Coal Furnace: Hot blast 1357m
Coal Size/Type: Nut
Other Heating: Electric/heatpump

Post by Jjones6840 » Mon. Nov. 18, 2019 7:00 pm

Thank you, I was thinking of it just the opposite way, I will stick with nut


 
User avatar
joeq
Member
Posts: 5743
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Tue. Nov. 19, 2019 7:31 pm

If your stove will allow it, different coal sizing is beneficial to tuning your stove to varying conditions. I'm sure there's a thread here discussing this issue. Maybe check it out in the search bubble.

 
Wal
Member
Posts: 454
Joined: Tue. Jun. 27, 2017 8:53 am
Location: Uk
Hand Fed Coal Stove: Deville 600 , Colombian stove works morning star nu22
Baseburners & Antiques: Red Cross garnet mica baseburner double heater
Coal Size/Type: Nut anthracite / smokeless ovoids
Other Heating: Gas central heating / antique cast iron radiators

Post by Wal » Fri. Jan. 15, 2021 12:58 pm

Hi , I started off with stove size in my baseburner, no complaints about the heat output , but the burn times were shorter than I expected. However I have just bought a tonne of nut , and I reckon I am using 20lb a day less , and burn times have extended by about 5 hrs . So happy 😃.

Attachments


 
User avatar
joeq
Member
Posts: 5743
Joined: Sat. Feb. 11, 2012 11:53 am
Location: Northern CT
Hand Fed Coal Stove: G111, Southard Robertson

Post by joeq » Fri. Jan. 15, 2021 5:07 pm

There ya go. Nice when a plan comes together, aye?
By the way, "beautiful" stove ya gut there. Thanks for posting. :)


 
Hounds51
Member
Posts: 556
Joined: Sat. Feb. 22, 2020 9:46 pm
Location: Bethel, Pa
Hand Fed Coal Stove: 2 Legacy TLC 2000 one in the upper and 1 in the lower part of the house
Coal Size/Type: Wood and pea, nut ,stove and egg coal

Post by Hounds51 » Sat. Jan. 16, 2021 10:43 am

This winter,I am primarily burning pea coal, due to the long range winter forecast for the east cost.
But I also have some nut for the colder weather, and I also have some stove for the sub teens.
I think next year, I will buy my majority of coal in the nut size, and keep a ton or two of pea for the early and late burning seasons, before going to the shoulder wood burning seasons. Always good to have some stove just in case of sub teen's temperatures .

 
User avatar
Lightning
Site Moderator
Posts: 14669
Joined: Wed. Nov. 16, 2011 9:51 am
Location: Olean, NY
Stoker Coal Boiler: Modified AA 130
Coal Size/Type: Pea Size - Anthracite

Post by Lightning » Sun. Jan. 17, 2021 9:18 am

I found that a 50/50 blend of nut and stove size to be perfect for 90% of my usage. The other 10% (or less) of the time I would top the fuel bed with a thick blanket of fines for low and slow burning thru warm daytimes.

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”