Locke Warm Morning 120 520 Specs

Post Reply
 
User avatar
warminmn
Member
Posts: 5840
Joined: Tue. Feb. 08, 2011 5:59 pm
Location: Land of 11,842 lakes
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin, Riteway 37
Coal Size/Type: nut and stove anthracite, soft
Other Heating: anything that will burn with the least work needed

Post by warminmn » Thu. Mar. 21, 2019 9:42 am

Curious of height at top of stove, and weight of this stove. I think the 120 is the same, various names and makes. I found the inside dimensions already. Im speaking of the round models, not square. Thanks!

 
KingCoal
Member
Posts: 4411
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 2-Locke Warm Morning #120’s
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Thu. Mar. 21, 2019 11:08 am

if this hasn't been answered by the time I get home i'll post it up then. the 2 stoves are exact twins.

steve

 
User avatar
warminmn
Member
Posts: 5840
Joined: Tue. Feb. 08, 2011 5:59 pm
Location: Land of 11,842 lakes
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin, Riteway 37
Coal Size/Type: nut and stove anthracite, soft
Other Heating: anything that will burn with the least work needed

Post by warminmn » Thu. Mar. 21, 2019 12:35 pm

Thanks Steve. A good guess on the weight will be close enough. I located one an am hoping I can load/slide/come-a-long it onto my truck myself, if it isnt too tall for the spot I picked out. I hate pulling favors moving stuff cuz paybacks are hell :lol:

 
KingCoal
Member
Posts: 4411
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 2-Locke Warm Morning #120’s
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Thu. Mar. 21, 2019 4:17 pm

when I pick them up or drop them off I, take the top off, pull all the bricks and grates out and from there a single guy can pick up the barrel and feet and put it in a truck.

this kind of depends on how solid the bricks are. if they are holding in place but taking them out and then back in is likely to have esp. the chimney bricks break apart then you need help to pick the whole thing right straight up and back down and moving to and away from the truck the same way takes much more effort.

i'll be home in about an hour and a half and will post up asap.


 
KingCoal
Member
Posts: 4411
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 2-Locke Warm Morning #120’s
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Fri. Mar. 22, 2019 7:26 am

sorry I didn't get back to this last night. my 6 month old great grandson was visiting when I got home and I simply forgot.

the Locke 120 and the WM 520's are each 43" tall. I need to see if I can find the original weight from an advertisement but i'm going to guess 300# all assembled

 
KingCoal
Member
Posts: 4411
Joined: Wed. Apr. 03, 2013 1:24 pm
Location: Elkhart county, IN.
Hand Fed Coal Stove: 2-Locke Warm Morning #120’s
Baseburners & Antiques: 2014 DTS C17 Base Burner, GW #6
Coal Size/Type: Nut Anth.
Other Heating: none

Post by KingCoal » Fri. Mar. 22, 2019 7:40 am

shipping weight including crating 300# for both

 
User avatar
warminmn
Member
Posts: 5840
Joined: Tue. Feb. 08, 2011 5:59 pm
Location: Land of 11,842 lakes
Hand Fed Coal Stove: Chubby Junior, Efel Nestor Martin, Riteway 37
Coal Size/Type: nut and stove anthracite, soft
Other Heating: anything that will burn with the least work needed

Post by warminmn » Fri. Mar. 22, 2019 9:17 am

Thanks a lot! I'll be looking at it next week. :D

 
Sunnyincolodado
New Member
Posts: 14
Joined: Mon. Feb. 01, 2021 11:01 pm

Post by Sunnyincolodado » Fri. Feb. 19, 2021 1:15 am

Hello. I am needing two chimney bricks for a Locke 120 stove. Would you have any for sale, or know where I can find some? Thank you!


 
waytomany?s
Member
Posts: 332
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Fri. Feb. 19, 2021 7:34 pm

Which bricks?

 
Sunnyincolodado
New Member
Posts: 14
Joined: Mon. Feb. 01, 2021 11:01 pm

Post by Sunnyincolodado » Fri. Feb. 19, 2021 7:57 pm

The 2 bricks that have air channels cast into them. They sort of resemble a spear head.

 
Sunnyincolodado
New Member
Posts: 14
Joined: Mon. Feb. 01, 2021 11:01 pm

Post by Sunnyincolodado » Fri. Feb. 19, 2021 7:57 pm

Called chimney bricks

 
waytomany?s
Member
Posts: 332
Joined: Fri. Aug. 16, 2019 3:02 pm
Location: Oneida, N.Y.
Hand Fed Coal Stove: Harmon Mark II
Hand Fed Coal Furnace: Looking
Baseburners & Antiques: Looking
Coal Size/Type: Nut
Other Heating: newmac wood/coal combo furnace

Post by waytomany?s » Fri. Feb. 19, 2021 8:44 pm

According to king coal in a thread from 2017, the chimney bricks cannot be had for any price. Obsolete. Any of the grate pieces have either increased by a third in cost or have become obsolete as well.

Post Reply

Return to “Hand Fired Coal Stoves & Furnaces Using Anthracite”