Serge wrote: ↑Mon. Oct. 22, 2018 2:42 pmNew exprience today, to block air gap on shaker handle. I'll let know shortly the resalts.
1. 2x2 thin unpainted aluminium
2. Sqare center To approx. 3/4 x 3/4 and cut corners in angle
3. Fit it on the shaft
4. Put the washer (1" center hole) over and reinstall the shaker handle
Hitzer 50-93 fired up today
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Nice S--good job!! Sad the pix didn't come over!!!
- freetown fred
- Member
- Posts: 30293
- Joined: Thu. Dec. 31, 2009 12:33 pm
- Location: Freetown,NY 13803
- Hand Fed Coal Stove: HITZER 50-93
- Coal Size/Type: BLASCHAK Nut
Did they come over to this page? YES, real clear on last page.
-
- Member
- Posts: 283
- Joined: Tue. Jan. 13, 2015 8:49 am
- Location: Springwater NY, (Western NY)
- Hot Air Coal Stoker Stove: Keystoker 105 - SOLD
- Hand Fed Coal Stove: Hitzer 30-95 - Garage
- Hand Fed Coal Furnace: HITZER 50-93 - HOUSE
- Coal Size/Type: NUT
- Other Heating: PROPANE FURNACE, ELECTIC BASE BOARD, AND WOOD FIRE PLACE
Fired up the 50-93 yesterday. I sure did miss walking around the house in shorts and a T-shirt.