Thank You
My New Hitzer 55
- Reader Joseph
- Member
- Posts: 31
- Joined: Sat. Jan. 13, 2018 6:37 pm
- Location: Mineral Point {Cambria County} Pennsylvania
- Hand Fed Coal Furnace: Hitzer 55
- Coal Size/Type: Blaschak Chestnut
- SawDustJack
- Member
- Posts: 116
- Joined: Fri. Jan. 15, 2016 6:12 pm
- Location: Cape Cod
- Hand Fed Coal Stove: Newcastle/Ironhouse;Warm Morning 617a
- Coal Size/Type: Stove/Nut
Great install! That should heat your place for many years to come!
-
- Member
- Posts: 20
- Joined: Sat. Jan. 19, 2019 6:06 pm
- Hand Fed Coal Stove: Harman tlc
- Hand Fed Coal Furnace: DS Ecomiser
- Coal Size/Type: anthracite nut
That looks great, I just contacted bantlys my self. I’m either going to get a new 55 from them or a used hotblast 1537. I have to run duct work and never have. I wasn’t going to run a return just the filter box. I see your post was 3 years ago, are you still happy with it. What are your burn times like?
-
- Member
- Posts: 806
- Joined: Wed. Aug. 28, 2019 7:38 pm
- Location: Southwest P.A.
- Hand Fed Coal Stove: Hitzer 983/ Hitzer 55
- Coal Size/Type: Nut anthracite/pea
- Other Heating: Heat pump/forced air
Rmishler welcome to the forum. Hopefully the OP gets back to you. I have a 55 stove, to answer your question you can get 12 to 24hr burn times with no problems depending on how you want to run the stove.